FREE DELIVERY TODAY - 10% Discount for next 3 orders! Place your 1st order in.
Seaview 12-Inch Modular Mount – Aft Raked 10×10 Base for Large Satdomes
Seaview 12″ Modular Mount Aft Raked – 10×10 Base utilizes a flagship heavy-duty architecture designed for large-format satellite domes and heavy arrays. This mount provides elite situational awareness for long-range communication systems.
- Screen: 12-inch aft-raked rise, oversized 10×10″ heavy-duty base.
- Technology: Enhanced load-bearing design, modular top plate, internal routing.
- Connection: Supports large-diameter satellite and power cable bundles.
- Durability: Industrial-grade aluminum, salt-resistant finish, high-vibration rated.
- Warranty: Seaview 2-year limited warranty on structural mounting hardware.
Products are almost sold out
available only:
6In Stock
Description
Seaview 12-Inch Modular Mount Aft Raked – 10×10 Base for Large Satdomes
Eliminating the vibration and instability often associated with large satellite antennas, the Seaview 12-Inch Modular Mount features a heavy-duty 10×10 inch base. This aft-raked mount is specifically designed for the American yacht market, providing the necessary height and structural integrity to support large satdomes and high-performance radars. For the USA operator, the modular design ensures that your expensive communications equipment is positioned for optimal signal reception while enhancing the vessel’s profile with a sleek, forward-leaning aesthetic.
The 12-inch height provides critical clearance from other bridge equipment, while the modular top plate system allows for easy upgrades if you switch electronics brands in the future. Constructed from high-strength aluminum with a multi-step powder-coating process, this mount is built to withstand the corrosive salt-air environments of offshore cruising. With its pre-drilled cable paths and industrial-strength base, this 10×10 mount offers the American market a professional-grade solution for large-scale maritime satellite integration.
Core Technical Specifications
- Mount Height: 12 Inches.
- Base Dimensions: 10″ x 10″ (Heavy-Duty).
- Design: Aft Raked (Forward Leaning).
- Compatibility: Large Satdomes (KVH, SeaTel, Intellian).
- Material: Marine Grade Powder-Coated Aluminum.
- Modular Feature: Interchangeable Top Plates (Required).
- Cable Management: Internal Routing through Base.
- Finish: High-Gloss Brilliant White.
SEAVIEW 12-Inch Modular Mount Aft Raked (10x10 Base) Technical Specifications
| Product Type | Modular Satellite/Radar Mount |
| Height | 12-Inch (305 mm) |
| Base Plate Dimensions | 10" x 10" (Large Footprint) |
| Design Profile | Aft Raked (Forward Leaning Design) |
| Material | Marine Grade Aluminum (Chemigloss Powder Coat) |
| Compatibility | Large Satdomes (20" to 24"), Open Array Adapters |
| Cable Routing | Internal Oval Cable Channel |
| Mounting Pattern | Modular (Requires ADA Top Plate) |
| Included Hardware | Mounting Gasket and Base Hardware |
| Environmental Rating | Salt-Spray Tested (High Durability) |
Seaview 12-Inch Aft Raked Modular Mount FAQ
The 12-inch height provides the clearance needed for large satellite domes while the aft rake offers an aerodynamic Multi-function display interface aesthetic. This Seaview mount facilitates NMEA 2000 backbone integration, ensuring your peak-to-peak power output communications stay active while following Genuine Seaview Chart Cartography waypoints in open waters.
The wide base is designed to IPX7 waterproof rating standards to support the weight and wind load of heavy satellite equipment. This Seaview hardware provides a rock-solid Multi-function display interface platform, preventing the peak-to-peak power output signal from dropping due to mount flex, even when monitoring Chirp transducer frequency range data in heavy seas.
The modular design facilitates NMEA 2000 backbone integration via a hollow center for clean and protected cable management. This Seaview feature provides a sleek Multi-function display interface at the helm, shielding your peak-to-peak power output connectors and Genuine Seaview Chart Cartography data lines from UV damage and moisture.
Yes, the modular system facilitates a Multi-function display interface for swapping top plates as you upgrade your electronics. This Seaview flexibility allows you to maintain your peak-to-peak power output configuration and NMEA 2000 backbone integration without having to replace the entire mount, saving time and money on Genuine Seaview Parts.
The mount is finished with a high-gloss white powder coat to match IPX7 waterproof rating standards and maritime aesthetics. This Seaview coating ensures your Multi-function display interface hardware remains free of corrosion, protecting your peak-to-peak power output sensors and Chirp transducer frequency range equipment from the elements for years.
You must be logged in to post a review.
Reviews
There are no reviews yet.