Ritchie FN-201W Navigator Compass – Flush Mount – White

Description

The Ritchie FN-201W uses a 4.5-inch CombiDial direct-reading dial in a white flush-mount Navigator housing requiring a 5.25-inch helm-panel cutout. Internal 12V night illumination provides the stated source for low-light dial viewing after electrical connection. Built-in compensators support deviation adjustment after permanent installation, while the internal gimbal system combines with a sapphire jewel bearing and hardened steel pivot in the documented movement assembly.

Measuring 7.1 by 7.1 by 5.1 inches and weighing 3.1 pounds, the housing operates from negative 4°F to 140°F. Weatherproof construction is verified for this stated operating range. The selected panel location should provide room for the rear enclosure, a usable viewing position, and access for the 12V lighting connection before the 5.25-inch opening is prepared.

Key Specifications of the Ritchie FN-201W Marine Compass

• The 4.5-inch CombiDial provides direct-reading dial information within a white flush-mount Navigator housing configuration.
• A 5.25-inch cutout defines the required helm-panel opening before installing the 7.1-inch square compass housing.
• Internal 12V night illumination requires compatible circuit wiring and supplies the stated source for low-light dial viewing.
• Built-in compensators allow deviation adjustment after permanent mounting and final evaluation of the selected helm location.
• An internal gimbal, sapphire jewel bearing, and hardened steel pivot form the documented mechanical movement system behind the dial.
• Weatherproof construction operates from negative 4°F to 140°F, defining the stated environmental range for the 3.1-pound enclosure.

Helm Use and Readability

This Ritchie marine compass uses a 4.5-inch direct-reading CombiDial in a white flush-mount housing. The 12V internal night illumination provides the stated light source for dial viewing after connection to a compatible electrical circuit.

Within the housing, the internal gimbal works with a sapphire jewel bearing and hardened steel pivot. These documented components form the specified mechanical movement arrangement behind the card assembly.

Why Choose the Ritchie FN-201W Marine Compass

The FN-201W marine compass combines a 4.5-inch direct-reading CombiDial with a white flush-mount Navigator housing and 5.25-inch cutout requirement. Buyers comparing white helm-panel instruments can assess its 12V illumination, built-in compensators, and documented gimbal, jewel, and pivot movement system. The stated 7.1-inch square housing dimensions support panel-space planning before the installation opening is cut.

Mounting and Compensation Considerations

Confirm that the selected helm panel accepts a 5.25-inch, or 133 mm, cutout and provides clearance for the 7.1 by 7.1 by 5.1-inch housing. Plan the 12V lighting circuit, wiring route, and mounting orientation before preparing the installation area.

Align the main lubber line with the boat centerline and keep the installed unit away from speakers, electrical equipment, tools, and other magnetic-interference sources. Built-in compensators allow deviation adjustment after the final mounting position is established.

Warranty and Support

This model is covered by an Exclusive 5-Year Ritchie Warranty for defects in materials or workmanship from the purchase date. Breakage resulting from accident or misuse is excluded from this coverage. Mulmarine.com can assist with product details and order-related questions before purchase. Please review the warranty coverage and eligibility details on Mulmarine.com before purchase.

Before Ordering the Ritchie FN-201W Marine Compass

Before ordering, verify that your helm accepts a 5.25-inch flush-mount cutout and provides clearance for the 7.1 by 7.1 by 5.1-inch housing. Confirm your 12V illumination connection, planned wire route, dial-viewing position, and distance from speakers, electronics, tools, or other magnetic-interference sources.