FREE DELIVERY TODAY - Place your 1st order.
CTM Marine CT-6S 6000 BTU Soft Start Boat A/C
The CTM Marine CT-6S 6000 BTU Soft Start Boat A/C self-contained climate system directly provides an 8.5 Amps LRA starting current utilizing an integrated soft start microcontroller to dampen inrush surges
- Features 6,000 BTU/h reverse cycle heating
- Provides 5/8″ outer diameter hose barbs
- Requires 115 Volts AC inputs
- Draws 5.6 Amps heating duty current
Products are almost sold out
available only:
5In Stock
Description
The CTM Marine CT-6S 6000 BTU Soft Start Boat A/C eliminates large electrical inrush surges and destructive voltage drops on inverter-backed compact staterooms, small pocket cruisers, cuddy sleeper cabins, and small boats running on micro-generators or lithium-battery banks. Operating on a standard 115 Volts AC base rail, this self-contained direct-expansion marine air conditioner coordinates an integrated soft start microcontroller to replace raw legacy rotary hardware entirely. Navigators can run off small storage banks safely, letting the 6000 BTU/h cooling and heating matrix adjust room metrics flawlessly across changing coastal day or night cycles.
Featuring a corrosion-resistant cupronickel coaxial heat exchanger tube, the compact 16.1″ length chassis prevents internal block pitting from aggregate raw water flow tracks under a minimum 180 GPH sea water loop. The advanced sun-safe cooling block runs on an ultra-low 8.5 Amp locked rotor starting current, utilizing a 4.0″ rotatable high-velocity blower collar to feed crisp air into small living spaces while restricting dry weight to 40.0 lbs over a lightweight stainless steel pan. Procuring this premium United States-manufactured reverse cycle heat pump secures elite climate tracking via digital touchscreen control units, backed by an elite 2-Year factory limited mechanical component protection warranty.
Key Features of CTM Marine CT-6S
- Self-Contained Direct-Expansion Reverse Cycle Marine AC Unit links a compact thermal expansion loop, soft-start microcontroller, and plumbing nodes into a singular space-saving cabin terminal.
- Integrated Soft Start Microcontroller technology dampens incoming power spikes dynamically to slash starting inrush current draw down to a minimal 8.5 Amps LRA.
- 6000 BTU/h Cooling and Heating Output Core pushes powerful climate metrics deep into small sleeping quarters to eliminate thick humidity and oppressive tropical heat.
- High-Efficiency Hermetic Rotary Compressor Core handles massive thermal compression demands smoothly to minimize noise and cabin vibration patterns during long operational intervals.
- Rotatable High-Velocity 4.0″ Blower Collar forces high-volume airflow through cabin ventilation ducts, rotating dynamically to adapt to tight spaces without transmission air friction.
- Pre-Charged Environmentally Graded R-410A Gas maximizes thermodynamic cycle performance while fulfilling international ozone-safe environmental emission standards.
- Digital Touchscreen Control Unit Panel interfaces seamlessly via a multi-system control board to stream exact real-time temperature modifications down to the master logic layout.
- Oversized 5/8″ Outer Diameter Hose Barb Connections provide overbuilt plumbing connection nodes designed to accept standard reinforced marine seawater hoses securely.
- Corrosion-Resistant Lightweight Stainless Steel Pan seals against under-unit condensation leaks while stopping standard steel tray rust degradation from bilge humidity.
- Low Energy Max 4.9 Amps Cooling Current Draw preserves auxiliary alternator metrics while allowing safe operation off standard 15 Amp heavy-duty marine breakers.
In the Box
- 1x CTM Marine CT-6S 6000 BTU Soft Start Marine AC Unit
- 1x Programmable Digital Touchscreen Wall Control Panel
- 1x Multi-System Control Interface Board Assembly
- 1x Corrosion-Resistant Stainless Steel Condensation Drain Kit
- 1x Technical Installation Reference Manual and Wiring Blueprint Sheet
Direct Expansion Climate Engineering Shields Inverter Backed Small Boats
Optimized for compact staterooms and lithium-battery powered hulls ranging from 16 to 26 feet, this soft-start reverse cycle air conditioner ensures stable temperature tracking that guards cabin comfort. The advanced low-inrush hardware layout combined with comprehensive 2-Year factory limited warranty protection shields owners from unexpected power failures and expensive mechanical replacement bills. Keeping the seawater loop clear of marine sediment preserves pristine high-pressure compressor performance, keeping your cooling investment operating flawlessly season after season.
CTM Marine CT-6S 6000 BTU Soft Start Boat A/C Specs
| Brand | CTM Marine |
| Full Model SKU/Code | CT-6S-115V (Soft Start Integrated Series) |
| Country of Origin | USA |
| AC System Type | Self-Contained Direct-Expansion (DX) Marine AC |
| Cooling Capacity | 6,000 BTU/h (1.75 kW) |
| Heating Capacity | 6,000 BTU/h (Reverse Cycle Heat Pump Mode) |
| Refrigerant Type | R-410A Pre-Charged Eco-Friendly Gas |
| Compressor Technology | High-Efficiency Hermetic Rotary Compressor with Integrated Soft Start Microcontroller |
| Operating Voltage / Frequency | 115 Volts AC / 60 Hz Single Phase Base Rail |
| Full Load Amps / Running Current | Cooling Duty: 4.9 Amps / Heating Duty: 5.6 Amps |
| Locked Rotor Amps / Starting Current | 8.5 Amps LRA (Drastically reduced via dynamic step-up inrush current dampening) |
| Recommended Circuit Breaker Rating | 15 Amps Heavy-Duty Marine Breaker |
| Required Sea Water Flow Rate | 180 GPH / 11.4 Liters per minute minimum loop |
| Sea Water Inlet/Outlet Size | 5/8" (16mm) Outer Diameter Hose Barb Connections |
| Duct Display / Air Discharge Size | 4.0" (102mm) Rotatable High-Velocity Blower Collar |
| Condenser Coil Material | Corrosion-Resistant Cupronickel (CuNi 90/10) Coaxial Heat Exchanger Tube |
| Control Interface Connectivity | Digital Touchscreen Control Unit / Multi-System Control Interface Board |
| Dimensions (L x W x H) | 40.9 cm x 28.5 cm x 28.5 cm / 16.1" x 11.2" x 11.2" |
| Dry Weight | 18.1 kg / 40.0 lbs (Built on a corrosion-resistant lightweight stainless steel pan) |
| Application | Inverter-backed compact staterooms, small pocket cruisers, cuddy sleeper cabins, and small boats running on micro-generators or lithium-battery banks (16-26 ft boat lengths) |
Additional information
| Brand | CTM Marine |
|---|---|
| Cooling Capacity | 6000 BTU |
| Frequency | 50/60 Hz Dual |
| System Type | Self-Contained |
| Voltage | 115V |
You must be logged in to post a review.















Reviews
There are no reviews yet.