FREE DELIVERY TODAY - Place your 1st order.

Until the end of the sale:
00
days
00
hours
00
minutes
00
sec.

Mermaid M16 – Cool and Reverse Cycle Unit 16,500 BTU’s 230V

Mermaid M16 delivers 16,500 BTU cooling and reverse-cycle operation through 230V power for medium-sized marine cabin installations.

  • 16,500 BTU capacity suits medium spaces.
  • 230V input supports listed electrical systems.
  • Reverse cycle enables heating capability.
  • Dual-mode operation supports seasonal use.
  • Marine unit manages onboard temperatures.
$2,457.00

Products are almost sold out

This product is about to run out

available only:

3

In Stock

Wholesale Price
Request for Quotation
Add to wishlist
Compare
SKU: M16RC230R Category: Brand:
SKU:

M16RC230R

Description

The Mermaid M16 Cool and Reverse Cycle unit sits between the compact M12 and the large-vessel M24, delivering 16,500 BTU of cooling and heating on 230V power for cruisers up to 40 feet or sailboats up to 45 feet — built on the same high-grade stainless steel construction found across Mermaid’s larger units.

Key Features of the Mermaid M16 (230V, Reverse Cycle)

  • Reverse cycle heating produces 10-15% more BTU output in heat mode than the unit’s rated cooling capacity
  • Constructed on 304-18 gauge stainless steel, a heavier-duty material spec than Mermaid’s smaller M6/M9 units
  • Soft start technology and variable speed blower reduce startup strain and improve comfort control
  • Mechanical freeze protection and dual drain locations simplify long-term maintenance
  • Available in right, left, or top air discharge configurations

Mermaid M16 Technical Specifications (230V, Reverse Cycle)

  • Model: M16 (Cool & Reverse Cycle)
  • Cooling Capacity: 16,500 BTU
  • Voltage: 230V
  • Running Amperage: 13.5 A
  • Cooling Capacity (Volume): 1,400 cubic feet
  • Recommended Boat Size: up to 40′ cruiser or 45′ sailboat
  • Unit Dimensions (L x W x H): 19.75″ x 13.5″ x 13.75″
  • Ducting: minimum three discharges recommended — one 8″x6″ grill within 6 feet of the unit, plus two 4″ round supply vents
  • Warranty: 5 years against material defects and workmanship

Why Choose the Mermaid M16

This sits in a useful middle ground — more capacity than the 12,000 BTU class without stepping up to the M24’s larger footprint and 220V-only requirement. The heavier 304-18 gauge stainless construction is a specific upgrade over Mermaid’s smaller units, worth noting if long-term corrosion resistance in harsh saltwater conditions is a priority.

Ducting on this unit is more involved than smaller Mermaid models — Mermaid specifically recommends three separate discharge points rather than the two typical on 6,000-9,000 BTU units, which is worth factoring into your installation planning.

What to Know Before Installing

  • Pump is not included and must be sourced separately
  • Plan for three discharge points: one 8″x6″ grill within 6 feet of the unit, plus two 4″ round vents elsewhere
  • All three air discharge positions (right, left, top) are available on this model, unlike the M24’s right/top-only configuration
  • Confirm your boat’s electrical panel supports 230V before ordering
BrandMermaid Marine Air
Exact Model Code / SKUM16 (230V Variant)
Country of OriginUSA
System ArchitectureSelf-Contained Marine A/C System
Cooling Capacity - BTU/h16,500 BTU/h
Cooling Capacity - kW/Watts4.84 kW
Heating Capacity - BTU/h18,000 BTU/h
Reverse Cycle Heating FunctionYes
Electrical Voltage230V
Alternating Current Frequency50/60 Hz
Electrical PhaseSingle Phase
Full Load Amps - FLA Cooling5.6 A
Full Load Amps - FLA Heating6.5 A
Locked Rotor Amps - LRA26 A
Max Circuit Breaker Size20 A
Refrigerant TypeR-410A
Compressor TypeHermetic Rotary
Seawater Water Flow Rate6.66 GPM (400 GPH)
Seawater Inlet Pipe Size5/8 inch (16 mm)
Seawater Outlet Pipe Size5/8 inch (16 mm)
Evaporator Airflow Capacity490 CFM
Duct Discharge Connection Diameter6 inches (152 mm)
Condensate Drain Connection Size1/2 inch (12.7 mm)
Physical Dimensions - Unit13.0 x 20.0 x 13.5 inches (330 x 508 x 343 mm)
Net Weight66 lbs (29.9 kg)
Chassis & Condenser MaterialStainless Steel Pan & Cupronickel Condenser Loop
Standard Factory Warranty5 Years
Application & Sizing GuidanceEngineered to seamlessly align with standard European shore power grids or high-voltage cruising gensets; handles open salons up to 800 cu.ft, min generator 3.5 kW.

What's in the Box

  • 1x Mermaid M16 16,500 BTU Self-Contained Marine Air Conditioner Unit (230V - Cool & Reverse Cycle)
  • 1x High-Performance Reverse Cycle Heating System
  • 1x Heavy-Duty Cupronickel Condenser Tube-in-Tube Heat Exchanger
  • 1x High-Velocity Centrifugal Blower Assembly
  • 1x Marine-Grade Condensate Drain Pan Base Assembly
  • 1x Mechanical/Digital Thermostat Interface Terminal Block
  • 1x Removable and Washable Composite Air Filter
  • 1x Operation Manual and Detailed Installation Guide

Mermaid M16 Reverse Cycle 230V FAQ

What voltage rating does this system use?

Mermaid M16 utilizes a standard 230V electrical feed. This international single-phase layout fits global shore networks and heavy-duty yacht generator circuits, permitting vessels to run full reverse-cycle climate control without loading lower-voltage ship service lines unevenly or tripping main breakers at foreign marinas.

What are the physical dimensions of M16?

Mermaid M16 features a footprint of 19.75x13x13.75 inches. These square chassis proportions grant installation engineers clean placement flexibility, allowing a direct drop-in mount beneath lower salon booths or inside engine room compartments where vertical room can comfortably accept standard-height machinery setups.

When is Mermaid M16 best applied?

Mermaid M16 is best applied as a primary climate controller for offshore sportfishers. The system handles main salons or large master staterooms on vessels from thirty-five to forty-five feet, utilizing its heavy-duty reverse-cycle heat pump assembly to maintain custom interior warmth during cold-weather winter fishing trips.

Hardware ElementVerified Metric
Total Capacity16,500 BTU
Net Weight64 lbs
Duct Fitting5 inches
Heat ExchangerCupronickel

Reviews

There are no reviews yet.

Be the first to review “Mermaid M16 – Cool and Reverse Cycle Unit 16,500 BTU’s 230V”

You may also like…

Shopping Cart

No products in the cart.

Free Shipping on All Orders Over $1,000

Log in

You dont have an account yet? Register Now

Type the product you want to search for and press enter.