Mermaid M9 – Cool & Reverse Cycle Unit 9,000 BTU’s 230V

Description

For boats in the 30 to 32-foot range, the Mermaid M9 Cool & Reverse Cycle unit offers a similar footprint to Mermaid’s smaller M6 model while stepping up to 9,000 BTU of cooling capacity on 230V power. It’s built to cool about 800 cubic feet of cabin space, and the reverse cycle function means the same unit handles both cooling and heating without needing a second system.

Key Features of the Mermaid M9

• Reverse cycle heating produces 10-15% more BTU output in heat mode than the unit’s rated cooling capacity
• Shares its stainless steel base with the smaller M6 unit, keeping the footprint compact for a 9,000 BTU system
• Available in right, left, or top air discharge configurations to match different cabin layouts
• Soft start technology and a variable speed blower reduce startup strain and improve comfort precision
• Runs off a Honda 2000-class generator, useful for boats relying on portable power
• Resettable 30-amp circuit breaker replaces the older glass fuse for simpler field maintenance

Mermaid M9 Technical Specifications

• Model: M9 (Cool & Reverse Cycle)
• Cooling Capacity: 9,000 BTU
• Voltage: 230V
• Running Amperage: 8.0 A
• Cooling Capacity (Volume): 800 cubic feet
• Recommended Boat Size: up to 30′ cruiser or 32′ sailboat
• Unit Dimensions (L x W x H): 16″ x 11.5″ x 11.5″
• Net Weight: 66 lbs (unit and packaging, per manufacturer listing)
• Ducting: 6″ and 4″ combination, minimum three 4″ round supply grilles recommended
• Warranty: 5 years against material defects and workmanship

Why Choose the Mermaid M9

Unlike the cool-only M12, this M9 configuration includes reverse cycle heating standard, which matters for boats used across seasons rather than just warm-weather cruising. The trade-off for that added function versus a cool-only unit is a modest increase in mechanical complexity, though Mermaid’s reversing valve design has been standard across their reverse cycle lineup for years.

Mermaid’s build volume — 900 to 1,200 units annually across boats from small cabin cruisers to 75-foot yachts — sits well below the largest mass-market marine AC brands, which can mean more consistent hand-assembly quality but potentially longer lead times than higher-volume manufacturers.

What to Know Before Installing

• Pump is not included and must be sourced separately
• Ducting requires both 6″ and 4″ runs, with at least three 4″ round supply grilles recommended by Mermaid
• Air discharge position (right, left, or top) must be selected before ordering, since it affects the unit’s installation orientation
• Reverse cycle heat output runs 10-15% higher than the unit’s cooling BTU rating, worth factoring into heating capacity planning for colder climates