ProNautic 1215P Marine Battery Charger

Description

With two dual-bank distribution outputs, theProMariner ProNautic 1215P Marine Battery Chargerprovides 15 amps of continuous 12V DC output. Its auto-ranging 100V to 240V AC input supports 50/60 Hz operation, while 12 selectable curves cover listed LiFePO4, AGM, gel, and flooded lead-acid battery chemistries.

The 5-stage automatic performance charger lists pre-calibrated 14.4V absorption and 13.4V float profiles. Active power factor correction supports over 90 percent efficiency, and a remote temperature probe is supported. IP21 dry-mount classification, SAE J1171 and ISO 8846 ignition-protection standards, and fan cooling with temperature monitoring are listed.

Key Specifications of the ProMariner ProNautic 1215P Marine Battery Charger

• The charger provides 15 amps of continuous output.
• Two banks use dual-bank distribution.
• The nominal charging output is 12V DC.
• Auto-ranging input accepts 100V to 240V AC.
• The input range supports 50 Hz and 60 Hz.
• Twelve selectable curves support listed battery chemistries.
• Five stages provide automatic performance charging.
• Absorption and float values are 14.4V and 13.4V.
• A remote temperature probe is supported.
• Active power factor correction supports over 90 percent efficiency.
• IP21 identifies this charger for dry mounting.
• The charger weighs 3.0 lbs.

Battery and Charging Compatibility

The ProNautic 1215P supports listed LiFePO4, AGM, gel, and flooded lead-acid battery profiles through 12 selectable charge curves. Its two-bank output provides 12V DC charging and is recommended for marine battery sets from 30Ah to 150Ah.

This dual bank battery charger lists pre-calibrated 14.4V absorption and 13.4V float values. Use the profile that aligns with the specific battery manufacturer requirements for each connected bank.

Installation and System Considerations

The charger accepts 100V to 240V AC at 50/60 Hz and outputs 12V DC. It is listed with IP21 dry-mount classification, SAE J1171 and ISO 8846 ignition-protection standards, and an internal cooling fan with temperature monitoring. Its dimensions are 9.0 in. by 5.5 in. by 3.0 in. Installation should follow the charger manual and the electrical requirements applicable to the vessel.

Warranty and Support

The ProMariner ProNautic 1215P Marine Battery Charger includes a 5 Years Limited Manufacturer Warranty. Review the manufacturer documentation for product details, setup, and warranty coverage.

Before Ordering the ProMariner ProNautic 1215P Marine Battery Charger

Before ordering, confirm that your system uses 12V DC batteries and needs up to 15 amps across two outputs. Review the listed 12 chemistry curves, 30Ah to 150Ah recommendation, input range, dry-mount classification, installation dimensions, and warranty. You should confirm compatibility with your battery manufacturer and vessel electrical system before purchase.