Antaira LNP-0500G-T Industrial Unmanaged PoE Switch

Description

Centralize Gigabit Ethernet and PoE+ connections with the Antaira LNP-0500G-T Industrial Unmanaged PoE Switch. This industrial 5-port Gigabit unmanaged PoE+ marine-grade switch hub is specified for centralizing network-power routing to equipment such as IP marine cameras, high-power cellular routers, Starlink power units, and networked multifunction displays in vessel electronics compartments.

Antaira Technologies model LNP-0500G-T operates on 48V to 55V DC through an extended-range terminal block and requires an external step-up converter on 12V or 24V boats. It provides five 10/100/1000BaseTX Gigabit RJ45 ports, including four IEEE 802.3at PoE+ ports, with up to 120W total PoE power delivery and a maximum internal switch draw of 5W.

Key Features of Antaira LNP-0500G-T

• Industrial 5-port unmanaged PoE+ switch hub supports the listed centralized vessel-network power-routing application.
• 48V to 55V DC terminal-block input identifies the required operating-voltage range.
• External step-up converter is required on 12V or 24V boats as stated by the product data.
• Five 10/100/1000BaseTX Gigabit RJ45 ports provide the listed Ethernet connection count.
• Four IEEE 802.3at PoE+ ports identify the listed power-over-Ethernet port count.
• Up to 120W total PoE power delivery defines the listed PoE power budget.
• Maximum 5W internal switch power consumption identifies the listed device draw.
• IP30 rugged metal enclosure is specified for dry indoor or console-backplane mounting.
• Measures 1.18 x 3.90 x 5.59 inches (3.0 x 9.9 x 14.2 cm) for installation-space planning.
• 1.0 lb (0.45 kg) dry weight supports handling and mounting planning.

Network Compatibility and Use

The Antaira LNP-0500G-T is specified for vessel electronics compartments that centralize Gigabit Ethernet and PoE+ power routing. It provides five Gigabit RJ45 nodes and four IEEE 802.3at PoE+ ports, which must be matched to the power and network requirements of connected equipment. It requires 48V to 55V DC input and an external step-up converter on 12V or 24V boats. Confirm compatibility with your router, modem, antenna system, vessel network, and manufacturer documentation before ordering.

Installation and Service Considerations

Verify that the vessel provides a compatible 48V to 55V DC power source or that the installation includes the required external step-up converter for a 12V or 24V boat. Confirm the connected devices do not exceed the listed 120W total PoE power budget and that the planned equipment uses compatible Gigabit RJ45 and IEEE 802.3at PoE+ connections. Install the IP30 metal enclosure in a dry indoor or console-backplane location. Follow the product instructions and your vessel electronics manufacturer’s documentation for mounting, cabling, power connections, sealing, and network setup.

Before Ordering the Antaira LNP-0500G-T

Verify that Antaira Technologies model LNP-0500G-T matches your vessel network-power distribution plan. Confirm the industrial 5-port Gigabit unmanaged PoE+ switch type, 48V to 55V DC terminal-block input, required external step-up converter for 12V or 24V boats, five 10/100/1000BaseTX Gigabit RJ45 ports, four IEEE 802.3at PoE+ ports, up to 120W total PoE budget, 5W maximum internal switch consumption, IP30 rugged metal enclosure, dry indoor mounting requirement, 1.18 x 3.90 x 5.59 inch dimensions, 1.0 lb dry weight, and 5-year limited factory replacement warranty. Confirm compatibility with your router, modem, antenna system, vessel network, and manufacturer documentation before purchase.