HO Omni Ultra Black Slalom Ski w/ Stance ATOP Binding and Stance ATOP Rear Toe Plate

Description

Fine-tuned rear-foot control can change how a skier approaches a turn, and the HO Omni Ultra Black Slalom Ski w/ Stance ATOP Binding and Stance ATOP Rear Toe Plate combines that flexibility with a 2nd Generation Carbon Omni Ultra platform. The package includes the Omni Ultra Black ski, Stance ATOP front boot, Stance ATOP Adjustable Rear Toe Plate, Syndicate adjustable aluminum fin block, Asher Balance blade, and stainless steel slalom mounting hardware. The carbon laminate construction, high-volume concave, Clean Edge tail, larger bevels, and four-stage rockerline target intermediate through competition-pro riders.

The high-volume deep concave bottom supports in-water hold and cross-wake stability, while the Clean Edge tail sheds water vertically with 50 percent less resistance. Larger stability bevels accommodate higher inward lean angles, and the modernized four-stage rocker uses dual flat spots for balance. Suggested boat speed ranges from 24 to 34 MPH or 38 to 55 km/h. Available lengths include 65 inches for riders below 150 lbs, 67 inches for 150 to 200 lbs, 69 inches for 200 to 250 lbs, and 69-inch Wide for riders above 250 lbs. The Stance ATOP front boot uses a lower ATOP Reel Lacing dial, bungee upper cuff, UltraLite baseplate, and 6mm baseless zero-drop orthotic footbed. The rear ATOP toe plate adds its own dial tensioner and contoured footbed.

Key Features of HO Omni Ultra Black Slalom Ski w/ Stance ATOP Binding

• Carbon fiber laminates support the 2nd Generation Omni Ultra platform
• Deep concave bottom supports hold during course and wake crossings
• Clean Edge tail produces the listed 50 percent resistance reduction
• Larger bevels support higher inward lean angles
• Four-stage rockerline uses dual flat zones for balance
• Asher Balance blade provides adjustable fin positioning
• ATOP dial controls lower-zone front boot tension
• Rear ATOP toe plate adjusts independent rear-foot pressure

High-Performance Slalom and Free-Ski Carving

This package suits skiers who want a front boot with micro-adjustable ATOP closure and a rear toe plate with matching dial tension. The arrangement leaves the rear foot more flexible than a full rear boot while keeping the front foot enclosed. The Omni Ultra hull supports both course skiing and precise open-water carving, while the larger bevels and high-volume concave provide clear setup features for experienced riders. Match the ski length to rider weight, then select the correct front boot size and confirm rear toe plate compatibility before ordering.

Why Choose HO Omni Ultra Black Slalom Ski w/ Stance ATOP Binding

Choose this configuration when quick front-boot adjustment matters and the rider prefers a rear toe plate instead of a second full boot. The ATOP Reel dial provides a direct tension adjustment, while the UltraLite baseplate and orthotic footbed keep the binding platform connected to the ski. The 65, 67, 69, and 69 Wide size options cover several rider-weight groups. The ski, front boot, rear ARTP, fin system, blade, and stainless steel hardware arrive as one matched package.

Warranty & Maintenance

HO Omni Ultra Black Slalom Ski w/ Stance ATOP Binding and Stance ATOP Rear Toe Plate includes a 1 Year Limited Manufacturer Warranty. Confirm current warranty terms, selected ski length, front boot size, rear toe plate, fin hardware, and package contents before purchase. Inspect the ATOP dial, upper bungee, boot liner, orthotic footbed, rear tensioner, fin screws, metric inserts, ski base, and edges before use. Keep the bindings dry between sessions and protect the carbon ski during transport and storage. Follow the manufacturer’s current care instructions. ([hosports.com](https://www.hosports.com/products/omni-ultra-black-w-stance-atop-artp?utm_source=openai))