B&G 608 Wind Sensor w/o cable

Description

The B&G 608 Wind Sensor is a masthead NMEA 2000 wind vane for sailing boats that need wind speed and direction on a B&G instrument network. It is a sensor-only unit, not a display or complete wind package. This version is supplied without a cable, so the NMEA 2000 connection and masthead wiring need to be planned before installation.

The sensor runs from 9-16V DC, uses only 0.3W, and has an NMEA 2000 LEN of 1, making it a light load on the boat’s network. Its 500mm arm gives the vane useful clearance above the masthead, while IPX6 protection suits exposed mounting. The single Micro-C port connects to the NMEA 2000 backbone, where compatible B&G displays can use the wind data. Because no cable is included, verify the required drop length and connector arrangement first.

Key Features

• NMEA 2000 wind vane – Sends compatible wind data directly to the boat network.
• 500mm arm – Helps position the sensor above local masthead disturbance.
• 0.3W power draw and LEN 1 – Places very little load on the NMEA 2000 backbone.
• One NMEA 2000 Micro-C port – Provides the listed network connection.
• IPX6 protection – Suits exposed masthead installation.

Who Is This For?

This B&G wind sensor suits sailing boats adding or replacing a masthead sensor on an NMEA 2000 system. It is not ideal for buyers wanting a display, cable, or complete wind instrument pack, because the sensor is supplied without a cable.

Compatibility

Confirmed compatibility includes NMEA 2000 through one Micro-C port and compatible B&G sailing displays and instruments. The supplied information does not identify specific cable assemblies, Garmin, Raymarine, Simrad, NMEA 0183, radar, or autopilot compatibility. No named incompatible system was provided; confirm the cable and network requirements before installation.

Technical Specifications

• Brand: B&G Navico
• Model: 608 Wind Sensor, 000-13714-001
• Device type: NMEA 2000 wind vane
• Connection: One NMEA 2000 Micro-C
• Voltage: 12V DC, 9-16V range
• Power draw: 0.3W; LEN 1
• Arm length: 500mm / 19.7 inches
• Cable: Not included
• Water rating: IPX6
• Weight: 0.3kg / 0.7lbs

Warranty & Support

B&G provides a 2-year standard warranty. The supplied specifications do not state warranty exclusions or service procedures.

The 608 is a tidy NMEA 2000 wind-sensor option when the boat already has a B&G instrument network and the installer wants to choose the cable length. Its trade-off is the missing cable and display, which are easy to overlook when comparing prices. Choose it for a planned masthead installation, not as a complete wind system.