Hatteland Series X – Generation 2 (G2) 24 Multi-Power Display w/Buttons – AC/DC 24V

Description

The Hatteland Series X G2 24 is a 24-inch industrial marine monitor with Full HD resolution, physical OSD buttons, and multi-power AC/DC input. It is designed to show output from a separate radar, chart, ECDIS, or vessel computer system. The button-controlled interface suits bridge operators who prefer direct adjustments without relying on a touchscreen.

At 300 cd/m² typical brightness, this display is better suited to an enclosed bridge or pilothouse than a fully exposed deck. DVI-D, DisplayPort, HDMI, VGA, and SCOM cover common marine video sources, while Ethernet provides control and RS-232/422/485 supports serial equipment. The front is sealed to IP66, but the rear is IP22, so the mounting location still needs protection from direct water. It accepts 115/230V AC and 24V DC.

Key Features

• 24-inch Full HD display – Provides a large bridge workspace for radar, chart, or computer output.
• 1920 x 1080 resolution – Matches common Full HD marine source systems.
• 300 cd/m² typical brightness – Suits enclosed bridge and pilothouse viewing.
• Physical OSD buttons – Allows direct screen adjustment without touchscreen control.
• DVI-D, DisplayPort, HDMI, VGA, SCOM, Ethernet, and serial interfaces – Supports varied marine source and control equipment.

Who Is This For?

This 24-inch marine monitor suits commercial bridges, offshore workboats, and enclosed pilothouses using separate navigation or radar computers. It is not ideal for an exposed open helm, where the rear IP22 rating and moderate brightness require more protection than the installation may provide.

Compatibility

Confirmed connections include DVI-D, DisplayPort, HDMI, VGA, SCOM, Ethernet for control, and RS-232/422/485. The supplied information does not identify a specific chartplotter, radar, sonar, NMEA 2000, or NMEA 0183 system. No named incompatible system was provided; verify the source signal, serial-control, and mounting requirements before purchase.

Technical Specifications

• Brand: Hatteland Technology
• Model: HD 24T22 MMD
• Part number: HD24T22MMD-MA1-FAGA
• Display: 24-inch TFT active matrix LED-backlit display with OSD buttons
• Resolution: 1920 x 1080 Full HD
• Brightness: 300 cd/m² typical
• Video interfaces: DVI-D, DisplayPort, HDMI, VGA, SCOM
• Control interfaces: Ethernet and RS-232/422/485
• Power: 115/230V AC and 24V DC; 40W typical
• Protection: IP66 front and IP22 rear

Warranty & Support

Hatteland Technology provides a 2-year standard warranty. The supplied specifications do not state warranty exclusions or service procedures.

The Hatteland 24 is the practical alternative to the 32-inch 4K model when Full HD is sufficient and the bridge needs physical buttons. It uses less power and takes less space, but its 300 cd/m² brightness is better suited to an enclosed bridge than direct sun. Choose it for commercial or pilothouse use where source and serial-interface flexibility matter.