FREE DELIVERY TODAY - Place your 1st order.
Maretron CLM100 – NMEA 2000 Current Loop Monitor
Maretron CLM100 monitors current loops through an NMEA 2000 interface for connected marine electrical measurement systems.
- CLM100 identifies the monitor model.
- Current loop monitoring tracks electrical signals.
- NMEA 2000 carries networked measurements.
- Marine systems receive monitored data.
- Compatible network equipment remains necessary.
Products are almost sold out
available only:
6In Stock
Description
The Maretron CLM100 converts 4-20mA analog sensor signals into NMEA 2000 data for compatible vessel monitoring displays. Its four input channels accept current-loop sensors used for pressure, humidity, temperature, and other supported measurements. Each channel can use programmable labels and instances, allowing the Maretron current loop monitor to identify connected sensor data within the network.
The unit receives power through the NMEA 2000 network, consumes less than 50mA, and uses a high-impact plastic housing with an IP67 rating. The listed accuracy is plus or minus 1 percent of full scale, excluding the performance of the connected sensor.
Key Specifications of the Maretron CLM100 NMEA 2000 Current Loop Monitor
- Four channels accept 4-20mA current-loop sensors.
- Analog inputs convert sensor signals to NMEA 2000 data.
- Pressure, humidity, and temperature sensors are supported.
- Each channel uses programmable labels and instances.
- Measurement accuracy is plus or minus 1 percent.
- NMEA 2000 Micro-C provides network data connectivity.
- Network power operates from 9 to 32V DC.
- Power consumption remains below 50mA.
- The listed network load is one LEN.
- IP67 rating identifies the specified housing protection level.
Screen, Controls, and Display Functions
The CLM100 is an analog interface gateway rather than a standalone display. It measures connected 4-20mA current-loop signals and sends the converted information through NMEA 2000. A compatible NMEA 2000 display or vessel monitoring system is required to present the resulting sensor data.
Mounting, Power, and Compatibility Considerations
Verify the connected 4-20mA sensor type, channel wiring, NMEA 2000 Micro-C connection, 9 to 32V DC network supply, and available mounting location before installation. Confirm the sensor calibration range and programmable channel settings for each pressure, humidity, temperature, or other supported measurement.
Warranty and Support
Warranty coverage is not confirmed in the available product data. Buyers should verify current coverage, exclusions, and claim procedures with the seller or manufacturer before purchase. These terms reflect currently available manufacturer information, and buyers should verify active warranty policies directly with the seller or manufacturer before purchase.
Before Ordering the Maretron CLM100 NMEA 2000 Current Loop Monitor
Verify the 4-20mA sensor type, number of channels, calibration range, NMEA 2000 network, 9 to 32V DC supply, channel labels, mounting location, and compatible display before ordering.
| Product Type | Analog Interface to NMEA 2000 Gateway |
| Input Channels | 4-20mA Current Loop Sensors |
| Measurement Accuracy | +/- 1% of Full Scale |
| Data Connectivity | NMEA 2000 (Micro-C) |
| Power Source | NMEA 2000 Network (9-32V DC) |
| Power Consumption | Less than 50mA (LEN 1) |
| Supported Sensors | Pressure, Humidity, Temperature (4-20mA) |
| Programmable Settings | User-defined labels and instances |
| Housing Material | High-impact Plastic |
| Waterproof Rating | IP67 |
| Operating Temperature | -25°C to +55°C |
| Weight | 0.18 kg (0.4 lbs) |
You must be logged in to post a review.













Reviews
There are no reviews yet.