FREE DELIVERY TODAY - Place your 1st order.
Raritan MK5 Marine Rudder Angle Indicator Meter
Raritan MK5 Marine Rudder Angle Indicator Meter displays rudder position through a dedicated marine instrument for helm monitoring.
- MK5 identifies the indicator model.
- Rudder meter displays steering angle.
- Marine instrument supports helm monitoring.
- Indicator presents rudder position data.
- Raritan identifies the manufacturer.
Products are almost sold out
available only:
8In Stock
Description
The Raritan MK5 is a dedicated marine rudder angle indicator for boats that need a simple mechanical readout at the helm. It shows rudder position to port and starboard through an analogue sweeping pointer, making docking and low-speed maneuvering easier to judge without looking away from the wheel. This is a gauge only and requires a matching Raritan rudder feedback transmitter.
The MK5 uses a standard analogue resistive signal and supports 12V or 24V configurations, so it can fit traditional mechanical quadrants, tiller arms, and hydraulic steering systems when the sender is compatible. Internal incandescent backlighting helps at night, while the 3-3/8-inch hole size suits a conventional instrument panel. It has no NMEA 2000, NMEA 0183, charting, or network connection. Confirm the sender before installation; the indicator cannot determine rudder angle by itself.
Key Features
- Analogue rudder angle pointer – Gives an immediate port and starboard steering reference.
- 12V or 24V configurations – Fits common vessel electrical systems.
- Standard 3-3/8-inch hole size – Suits a conventional flush-mounted gauge panel.
- Internal perimeter backlighting – Keeps the pointer visible at night.
- IPX6 front protection – Helps protect the gauge face from marine splash.
Who Is This For?
This rudder angle indicator suits trawlers, inboard cruisers, workboats, and flybridge yachts that need a dedicated steering-position gauge. It is not ideal for a digital NMEA network installation or a buyer without the matching Raritan feedback sender.
Compatibility
Confirmed compatibility includes a standard analogue resistive signal from a matching Raritan rudder feedback transmitter and traditional mechanical quadrant, tiller-arm, or hydraulic-ram rudders. The supplied information does not identify NMEA 2000, NMEA 0183, Garmin, Raymarine, B&G, Simrad, autopilot, or third-party sender compatibility. No named incompatible system was provided.
Technical Specifications
- Brand: Raritan Engineering
- Model: MK5 / MK5-12V
- Device type: Analogue rudder angle indicator
- Reading: Rudder angle in degrees port/starboard
- Signal: Standard analogue resistive
- Sender: Matching Raritan rudder feedback transmitter required
- Voltage: 12V or 24V configuration
- Power draw: 60mA maximum with backlight
- Cutout: 85mm / 3-3/8 inches
- Water rating: IPX6 front
Warranty & Support
The supplied specifications do not state a warranty term. Confirm current Raritan warranty coverage and exclusions before purchase.
The MK5 is the larger, traditional rudder-angle gauge choice when the helmsman wants a clear pointer during docking and close-quarters handling. Its trade-off is the analogue installation: a compatible sender and direct wiring are required, with no NMEA data connection. Choose it for a conventional steering system, not a modern networked instrument layout.
| Brand | Raritan Engineering |
| Full Model SKU/Code | MK5 / MK5-12V (or corresponding 24V indicator pack variant) |
| Country of Origin | USA |
| Gauge Type | Single-Function Dedicated Analog Position Indicator |
| Monitored Parameters | Rudder Angle Position (Degrees Port/Starboard) |
| Data Bus / Protocol Compatibility | Standard Analog Resistive (Requires direct linkage to Raritan matching rudder feedback transmitter sender unit) |
| Engine Brand Compatibility | Universal Compatibility with traditional mechanical quadrant, tiller arm, or hydraulic ram rudders |
| Display Technology & Backlighting | Mechanical Sweeping Pointer Dial with Internal Incandescent Perimeter Panel Backlighting |
| Bezel/Housing Diameter | 85 mm / 3-3/8" Standard Hole Size |
| Mounting Method / Cutout Size | Dash Flush Console Mount with Backplane Brackets or Rear Threaded Stud Ring |
| Operating Voltage | 12 Volts DC / 24 Volts DC Adaptive Configuration Options |
| Current Draw / NMEA 2000 LEN | Max Total Load Draw with Backlighting Active: 60 mA |
| Waterproof Rating | IPX6 Front Facing Display Splash Defended Trim Trim Seal |
| Lens Technology | Scratch-Resistant Domed Polymer Protective Marine Lens |
| Material & Bezel Finish | Corrosion-Free Composite Shell Enclosure with Matte Black Bezel Frame Outer Ring |
| Number of Supportable Engines | Single Vessel Steering Rudder Alignment Geometry Asset |
| Dry Weight | 0.36 kg / 0.80 lbs (Display Meter Core Unit Only) |
| Application | Real-time mechanical alignment monitoring at the helm for displacement trawlers, inboard cruisers, workboats, and flybridge cruising yachts tracking docking tracks (20-65 ft boat lengths) |
You must be logged in to post a review.
Reviews
There are no reviews yet.