Apex A-24 Deluxe Tender – 24-Foot Inflatable Boat

Description

At 7.32 m, or 24 ft, the Apex RIBs A-24 Deluxe is a center-console rigid inflatable boat with a deep-V fiberglass hull and high-performance stringer system. Its heavy-duty fiberglass deck uses a molded anti-skid surface, while optional teak finish is specified for deck presentation. Six buoyancy chambers use ORCA Hypalon 1100 dtex fabric with cold-bonded hand-laminated seams. The 1100 kg, or 2,425 lb, net weight should be matched with lifting, trailer, storage, and docking plans.

ISO capacity is 12 persons, and the 1,500 kg, or 3,307 lb, maximum payload applies to passenger and cargo loading. A 25-inch extra-long-shaft outboard matches the transom configuration, with 200 HP recommended, 250 HP maximum, and a 285 kg, or 628 lb, engine-weight limit. High-flow Push-Push inflation valves serve the six buoyancy chambers, while CE Category B applies to the stated offshore classification.

Key Specifications of the Apex RIBs A-24 Deluxe Rigid Inflatable Boat

• The center-console rigid inflatable boat measures 7.32 m, or 24 ft, overall and has an 1100 kg net weight.
• A deep-V rigid fiberglass hull uses a high-performance stringer system, defining the documented hull construction for this large console RIB.
• The heavy-duty fiberglass deck uses a molded anti-skid surface, while an optional teak finish is specified for deck presentation.
• Six buoyancy tubes use ORCA Hypalon 1100 dtex fabric with cold-bonded hand-laminated seams for the documented tube construction.
• ISO capacity is 12 persons, and the 1,500 kg maximum payload sets the stated passenger and cargo limit.
• A 25-inch extra-long-shaft outboard is required, with 200 HP recommended and 250 HP maximum for propulsion selection.
• Outboard weight must not exceed 285 kg, while high-flow Push-Push valves serve the documented six-chamber tube system.

Hull, Deck, and Capacity

An internal length of 6.20 m, or 20 ft 4 in, and an internal width of 1.60 m, or 5 ft 3 in, define the stated usable hull space. A 0.56 m, or 22 in, tube diameter accompanies the fiberglass deep-V hull, molded deck, stringer system, and six-chamber tube configuration.

Included equipment consists of a deluxe center console with windscreen, double helm bench seat, bow U-seating with cushions, integrated fuel tank, automatic bilge pump, and stainless steel arch with navigation lights. Keep passenger loading, payload, outboard shaft length, engine output, and engine weight within the stated limits.

Why Choose the Apex RIBs A-24 Deluxe Rigid Inflatable Boat

The A-24 Deluxe rigid inflatable boat combines a 7.32 m deep-V fiberglass hull with a center console, molded anti-skid deck, optional teak finish, high-performance stringer system, integrated fuel tank, and six ORCA Hypalon buoyancy chambers. Its 1100 kg net weight, 12-person ISO capacity, 1,500 kg payload rating, CE Category B designation, 25-inch extra-long-shaft requirement, 200 HP recommended power, 250 HP maximum power, and 285 kg engine limit provide defined comparison points for a large console RIB.

Setup and Outboard Considerations

Included components cover the center console with windscreen, double helm bench, bow U-seating with cushions, integrated fuel tank, automatic bilge pump, and stainless steel arch with navigation lights. Select a 25-inch extra-long-shaft outboard before rigging, then keep engine output at or below 250 HP and engine weight at or below 285 kg. Inflate all six buoyancy chambers through the high-flow Push-Push valves.

Warranty and Support

Apex RIBs provides a 5-Year Limited Warranty covering Hypalon tubes and the fiberglass hull. Mulmarine.com can help you review the 7.32 m hull dimensions, 1100 kg net weight, 1,500 kg payload limit, extra-long-shaft outboard requirement, and 285 kg engine-weight limit against your lifting, trailer, storage, dock, and propulsion plan before purchase. Review the stated warranty coverage and documented included components before ordering.

Before Ordering the Apex RIBs A-24 Deluxe Rigid Inflatable Boat

Confirm that your lifting, trailer, storage, and dock plan supports the 7.32 m overall length and 1100 kg net weight. You should use a 25-inch extra-long-shaft outboard, select 200 HP as the recommended power level, avoid exceeding 250 HP or 285 kg engine weight, and remain within the 12-person and 1,500 kg maximum capacity limits.