Apex A-10 Open RIB – 10-Foot Inflatable Dinghy

Description

Using a deep-V fiberglass hull and molded flat deck, the Apex RIBs A-10 Open is a 3.05 m, or 10 ft, open rigid inflatable boat and tender dinghy. A non-skid surface covers the fiberglass deck, while three buoyancy chambers use ORCA Hypalon 1100 dtex fabric with cold-bonded hand-laminated seams. At 88 kg, or 194 lb, the boat should be matched with the planned lifting, trailer, storage, and dock arrangement.

ISO capacity is four persons, and the 400 kg, or 882 lb, maximum payload applies to passenger and cargo loading. The transom requires a 15-inch short-shaft outboard, with 8 HP recommended, 15 HP maximum, and a 52 kg, or 115 lb, engine-weight limit. High-flow Push-Push inflation valves serve the three buoyancy chambers, while CE Category D applies to the stated sheltered-waters classification.

Key Specifications of the Apex RIBs A-10 Open Rigid Inflatable Boat

• The open fiberglass RIB measures 3.05 m, or 10 ft, overall and has an 88 kg net weight.
• A deep-V rigid fiberglass hull defines the documented hull construction for this open tender-dinghy configuration.
• The molded fiberglass flat deck uses a non-skid surface, establishing the specified deck arrangement for the open interior layout.
• Three buoyancy tubes use ORCA Hypalon 1100 dtex fabric with cold-bonded hand-laminated seams for the documented tube construction.
• ISO capacity is four persons, and the 400 kg maximum payload sets the stated passenger and cargo limit.
• A 15-inch short-shaft outboard is required, with 8 HP recommended and 15 HP maximum for propulsion selection.
• Outboard weight must not exceed 52 kg, while high-flow Push-Push valves serve the documented three-chamber tube system.

Hull, Deck, and Capacity

An internal length of 2.20 m, or 7 ft 2 in, and an internal width of 0.72 m, or 2 ft 4 in, define the stated usable hull space. A 0.41 m, or 16 in, tube diameter accompanies the deep-V fiberglass hull, molded deck, and three-chamber tube configuration.

Included equipment consists of a removable bench seat, aluminum oars with molded oarlocks, bow lifting eye, stern towing rings, and heavy-duty rub rail. Keep passenger loading, payload, outboard shaft length, engine output, and engine weight within the stated limits.

Why Choose the Apex RIBs A-10 Open Rigid Inflatable Boat

The A-10 Open rigid inflatable boat combines a 3.05 m fiberglass deep-V hull with an open molded deck, removable bench seat, aluminum oars, bow lifting eye, stern towing rings, and three ORCA Hypalon buoyancy chambers. Its 88 kg net weight, four-person ISO capacity, 400 kg payload rating, CE Category D designation, 15-inch short-shaft requirement, 8 HP recommended power, 15 HP maximum power, and 52 kg engine limit provide useful comparison points against lighter RIB Lite layouts.

Setup and Outboard Considerations

Included components cover the removable bench seat, aluminum oars with molded oarlocks, bow lifting eye, stern towing rings, and heavy-duty rub rail. Match the transom with a 15-inch short-shaft outboard, then keep engine output at or below 15 HP and engine weight at or below 52 kg. Inflate all three buoyancy chambers through the high-flow Push-Push inflation valves.

Warranty and Support

Apex RIBs provides a 5-Year Limited Warranty covering Hypalon tubes and the fiberglass hull. Before checkout, Mulmarine.com can help you review the 3.05 m hull dimensions, 88 kg net weight, 400 kg payload limit, short-shaft outboard requirement, and 52 kg engine-weight limit against your lifting, trailer, storage, dock, and propulsion plan. Review the stated warranty coverage and documented included components before ordering.

Before Ordering the Apex RIBs A-10 Open Rigid Inflatable Boat

Verify that your lifting, trailer, storage, and dock plan supports the 3.05 m overall length and 88 kg net weight. You should use a 15-inch short-shaft outboard, select 8 HP as the recommended power level, avoid exceeding 15 HP or 52 kg engine weight, and remain within the four-person and 400 kg maximum capacity limits.