AB Lammina 9.5 AL – 9-Foot 6-Inch Aluminum Hull Inflatable Boat

Description

Using a powder-coated 3.18 mm, or 1/8 inch, aluminum deep-V hull, the AB Inflatables Lammina 9.5 AL is a 2.90 m, or 9 ft 6 in, open aluminum-hull inflatable boat and yacht tender. Its flat aluminum deck uses anti-slip rubber pads, while three buoyancy tubes use ORCA CSM 1100 dtex fabric with cold-cured hand-laminated seams. The 60 kg, or 132 lb, net weight should be included in lift, trailer, dock, storage, and onboard handling planning.

Four persons may be carried within the ISO capacity, and the maximum payload is 430 kg, or 948 lb. A 15-inch short-shaft outboard is required, with 9.9 HP recommended, 15 HP maximum, and a 52 kg, or 115 lb, engine-weight limit. Leafield C7 Push-Push valves serve the three buoyancy chambers, while CE Category C applies to the stated inshore and coastal classification.

Key Specifications of the AB Inflatables Lammina 9.5 AL Rigid Inflatable Boat

• The open aluminum-hull yacht tender measures 2.90 m, or 9 ft 6 in, overall and has a 60 kg net weight.
• A powder-coated 3.18 mm aluminum deep-V hull includes a keel guard, defining the documented rigid-hull construction for this tender.
• Powder-coated aluminum forms the flat deck, while anti-slip rubber pads establish the specified deck surface for open-layout planning.
• Three buoyancy tubes use ORCA CSM 1100 dtex fabric with cold-cured hand-laminated seams for the documented tube construction.
• ISO capacity is four persons, and the 430 kg maximum payload sets the stated passenger and cargo limit.
• A 15-inch short-shaft outboard is required, with 9.9 HP recommended and 15 HP maximum for propulsion selection.
• Outboard weight must not exceed 52 kg, requiring engine selection within the stated transom-loading limit before rigging.

Hull, Deck, and Capacity

An internal length of 2.11 m, or 6 ft 11 in, and an internal width of 0.79 m, or 2 ft 7 in, define the stated usable hull space. A 0.41 m, or 16 in, tube diameter accompanies the deep-V aluminum hull, flat deck, keel guard, and three-chamber tube configuration.

Included equipment consists of an aluminum removable rowing bench, bow locker with cushion, heavy-duty rub rail, full-length keel guard, oars with molded oarlocks, lifting eyes, and towing rings. Leafield C7 Push-Push valves serve each buoyancy chamber. Keep passenger loading, payload, outboard shaft length, engine output, and engine weight within the stated limits.

Why Choose the AB Inflatables Lammina 9.5 AL Rigid Inflatable Boat

The Lammina 9.5 AL rigid inflatable boat combines a 2.90 m aluminum deep-V hull with an open deck, removable rowing bench, bow locker, full-length keel guard, and three ORCA CSM buoyancy chambers. Its 60 kg net weight, four-person ISO capacity, 430 kg payload rating, 15-inch short-shaft requirement, 9.9 HP recommended power, 15 HP maximum power, and 52 kg engine limit provide clear comparison points for an open aluminum yacht tender.

Setup and Outboard Considerations

Included components cover an aluminum removable rowing bench, bow locker with cushion, rub rail, full-length keel guard, oars with molded oarlocks, lifting eyes, and towing rings. Select a 15-inch short-shaft outboard before rigging, then keep engine output at or below 15 HP and engine weight at or below 52 kg. Inflate the three buoyancy chambers through the Leafield C7 Push-Push valves.

Warranty and Support

AB Inflatables provides a 10-Year Limited Warranty covering ORCA CSM fabric and aluminum hull structure. Mulmarine.com can help you review the 2.90 m hull dimensions, 60 kg net weight, 430 kg payload limit, short-shaft outboard requirement, and 52 kg engine-weight limit against your lifting, trailer, storage, and propulsion plan before purchase. Review the stated warranty coverage and documented included components before ordering.

Before Ordering the AB Inflatables Lammina 9.5 AL Rigid Inflatable Boat

Confirm that your lifting, trailer, storage, and dock plan supports the 2.90 m overall length and 60 kg net weight. You should use a 15-inch short-shaft outboard, select 9.9 HP as the recommended power level, avoid exceeding 15 HP or 52 kg engine weight, and remain within the four-person and 430 kg maximum capacity limits.