Apex A-13 Deluxe Tender – 13-Foot Luxury Dinghy

Description

At 3.96 m, or 13 ft, the Apex RIBs A-13 Deluxe combines a deep-V fiberglass hull with a molded non-skid deck in a compact console tender configuration. Three buoyancy chambers use ORCA Hypalon 1100 dtex fabric with cold-bonded hand-laminated seams. The 260 kg, or 573 lb, net weight should be accounted for when planning lifting, trailer, dock, storage, and propulsion requirements.

ISO capacity is five persons, and the 600 kg, or 1,322 lb, maximum payload applies to combined passenger and cargo loading. The transom requires a 20-inch long-shaft outboard, with 30 HP recommended, 40 HP maximum, and a 100 kg, or 220 lb, engine-weight limit. High-flow Push-Push inflation valves serve the three buoyancy chambers, while CE Category C applies to the stated inshore and coastal category.

Key Specifications of the Apex RIBs A-13 Deluxe Rigid Inflatable Boat

• The compact console RIB measures 3.96 m, or 13 ft, overall and has a 260 kg net weight.
• A deep-V rigid fiberglass hull defines the documented hull construction for this compact console yacht-tender configuration.
• The molded fiberglass deck uses a non-skid finish, establishing the specified deck-surface arrangement for the supplied layout.
• Three buoyancy tubes use ORCA Hypalon 1100 dtex fabric with cold-bonded hand-laminated seams for the documented tube construction.
• ISO capacity is five persons, and the 600 kg maximum payload sets the stated passenger and cargo limit.
• A 20-inch long-shaft outboard is required, with 30 HP recommended and 40 HP maximum for propulsion selection.
• Outboard weight must not exceed 100 kg, while high-flow Push-Push valves serve the documented three-chamber tube system.

Hull, Deck, and Capacity

An internal length of 3.05 m, or 10 ft, and an internal width of 0.91 m, or 3 ft, define the stated usable hull space. A 0.43 m, or 17 in, tube diameter accompanies the fiberglass deep-V hull, molded deck, and three-chamber tube configuration.

Included equipment consists of a mini steering console, upholstered bench seat, bow storage locker with cushion, heavy-duty rubbing strake, and stainless steel towing rings. Keep passenger loading, payload, engine output, engine weight, and the required long-shaft outboard within the stated product limits.

Why Choose the Apex RIBs A-13 Deluxe Rigid Inflatable Boat

The A-13 Deluxe rigid inflatable boat combines a 3.96 m fiberglass deep-V hull with a molded non-skid deck, mini steering console, upholstered bench, bow locker, and three ORCA Hypalon buoyancy chambers. Its 260 kg net weight, five-person ISO capacity, 600 kg payload rating, 20-inch long-shaft requirement, 30 HP recommended power, 40 HP maximum power, and 100 kg engine limit provide direct comparison points for a compact console dinghy.

Setup and Outboard Considerations

Included components cover the mini steering console, upholstered bench seat, bow locker with cushion, rubbing strake, and stainless steel towing rings. Match the transom with a 20-inch long-shaft outboard, then keep engine output at or below 40 HP and engine weight at or below 100 kg. Inflate all three buoyancy chambers through the high-flow Push-Push inflation valves.

Warranty and Support

Apex RIBs provides a 5-Year Limited Warranty covering Hypalon tubes and the fiberglass hull. Mulmarine.com can help you review the 3.96 m hull dimensions, 260 kg net weight, 600 kg payload limit, long-shaft outboard requirement, and 100 kg engine-weight limit against your lifting, trailer, storage, dock, and propulsion plan before purchase. Review the stated warranty coverage and documented included components before ordering.

Before Ordering the Apex RIBs A-13 Deluxe Rigid Inflatable Boat

Confirm that your lift, trailer, dock, and storage plan supports the 3.96 m overall length and 260 kg net weight. You should use a 20-inch long-shaft outboard, select 30 HP as the recommended power level, avoid exceeding 40 HP or 100 kg engine weight, and remain within the five-person and 600 kg maximum capacity limits.