Aquaglide Arete 20

Description

Using a 19 ft 8 in climbing profile through a 2.5 PSI chamber, theAquaglide Arete 20provides a high-profile commercial climbing wall and multi-hub terminal. Its Duratex 0.90 mm reinforced PVC structure supports four active climbers and requires a 10 ft deep-water fall zone.

Vario-Lock 10 provides the listed four-sided track compatibility. Six reinforced marine-grade stainless steel D-rings form the mooring points. The 19 ft 8 in by 7 ft 10 in structure weighs 229 lbs when dry.

Key Features of the Arete 20 Climbing Wall

• Duratex 0.90 mm reinforced PVC forms the listed high-profile commercial climbing-wall construction.
• Inflated dimensions measure 19 ft 8 in by 7 ft 10 in by 19 ft 8 in.
• Four active climbers can use the module at the same time.
• A 10 ft water depth provides the listed deep-water fall-zone clearance.
• The high-rigidity chamber operates at the listed 2.5 PSI pressure.
• Vario-Lock 10 provides the listed four-sided track connection compatibility.
• Six reinforced marine-grade stainless steel D-rings provide the listed mooring points.
• The 229 lbs dry weight supports transport and deployment planning.

Use and Capacity

The Arete 20 is classified as a high-profile commercial climbing wall and multi-hub terminal. It supports up to four concurrent active climbers. The required 10 ft water depth provides the listed deep-water fall-zone clearance beneath the 19 ft 8 in-high inflated structure.

Operators should maintain the listed 2.5 PSI high-rigidity chamber pressure and use Vario-Lock 10 compatible connections for track layouts. The available product details do not list a pump, anchor system, mooring lines, repair kit, safety equipment, or specific connected modules as included.

Materials and Construction

Duratex 0.90 mm heavy-duty reinforced commercial PVC forms the listed climbing-wall structure. Vario-Lock 10 straps provide the listed four-sided track connection system. Six reinforced marine-grade stainless steel D-rings form the listed mooring points.

Water, salt, sand, sunscreen residue, and debris can still collect around PVC panels, climbing surfaces, D-rings, straps, seams, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, interconnection, mooring, cleaning, and storage.

Installation and Setup

The Aquaglide climbing wall inflates to 19 ft 8 in by 7 ft 10 in by 19 ft 8 in and weighs 229 lbs when dry. Installers should choose a location with at least 10 ft of water depth, allow room for the full wall footprint and fall zone, plan the Vario-Lock 10 track layout, and identify six mooring points before deployment.

Inflate the high-rigidity chamber to the listed 2.5 PSI operating pressure. The provided product data does not confirm a pump, anchors, mooring lines, repair kit, safety equipment, or connection modules as included.

Care and Operating Notes

Rinse the PVC structure, climbing surfaces, D-rings, Vario-Lock straps, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris before storage or reinflation. Inspect seams, valves, climbing surfaces, straps, D-rings, and visible PVC panels before operation. Follow manufacturer instructions for inflation, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Arete 20 carries a 3-year limited commercial fleet protection warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the intended water location provides at least 10 ft of depth and space for the 19 ft 8 in by 7 ft 10 in by 19 ft 8 in climbing wall. Plan for no more than four active climbers, maintain 2.5 PSI chamber pressure, use Vario-Lock 10 compatible connections, account for the 229 lbs dry weight, and arrange six mooring points.