Aquaglide Jungle Joe TR

Description

During multi-level climbing and slide activity, theAquaglide Jungle Joe TRprovides a 19 ft 8 in by 14 ft 9 in pyramid and slide anchor hub with room for ten simultaneous users. Its Duratex 1100-denier reinforced PVC construction uses HA Weld seams. The module requires an 8 ft water-depth fall-zone clearance.

Vario-Lock 10 provides the listed four-sided track compatibility. Four heavy-duty marine-grade 316 stainless steel D-rings form the mooring points. The structure operates within the listed 2.0 to 2.5 PSI range and weighs 282 lbs when dry.

Key Features of the Jungle Joe TR

• Duratex 1100-denier reinforced PVC forms the listed multi-level climbing pyramid and slide-hub construction.
• HA Weld seams provide the listed hot-air welded structural seam technology.
• Inflated dimensions measure 19 ft 8 in by 14 ft 9 in by 12 ft 6 in.
• Up to ten users can occupy the module within its stated dynamic capacity.
• An 8 ft minimum water depth provides the listed fall-zone clearance requirement.
• Operating pressure ranges from 2.0 to 2.5 PSI for the inflatable structure.
• Vario-Lock 10 provides the listed four-sided track connection compatibility.
• Four heavy-duty marine-grade 316 stainless steel D-rings provide the listed mooring points.
• The 282 lbs dry weight supports transport and water-based deployment planning.

Use and Capacity

The Jungle Joe TR is classified as a commercial multi-level climbing pyramid and slide anchor hub. It supports up to ten simultaneous users as a stated dynamic capacity. The required 8 ft water depth provides the listed fall-zone clearance around the 12 ft 6 in-high inflated module.

Operators should maintain the listed 2.0 to 2.5 PSI inflation range and use Vario-Lock 10 compatible connections for four-sided track layouts. The available product details do not list a pump, anchor system, mooring lines, repair kit, safety equipment, or specific linked modules as included.

Materials and Construction

Duratex 0.90 mm, 1100-denier reinforced PVC forms the listed commercial inflatable structure. HA Weld hot-air welded seams provide the listed seam technology. Vario-Lock 10 straps and four marine-grade stainless steel D-rings form the listed connection and mooring hardware.

Water, salt, sand, sunscreen residue, and debris can still collect around PVC panels, climbing areas, slide surfaces, D-rings, straps, seams, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, interconnection, mooring, cleaning, and storage.

Installation and Setup

The Aquaglide climbing pyramid inflates to 19 ft 8 in by 14 ft 9 in by 12 ft 6 in and weighs 282 lbs when dry. Installers should choose a location with at least 8 ft of water depth, allow room for the full module and fall zone, plan the Vario-Lock 10 layout, and identify four mooring positions before deployment.

Inflate the structure within the listed 2.0 to 2.5 PSI range. The provided product data does not confirm a pump, anchors, mooring lines, repair kit, safety equipment, or connection modules as included.

Care and Operating Notes

Rinse the PVC structure, climbing surfaces, slide areas, D-rings, Vario-Lock straps, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris before storage or reinflation. Inspect seams, valves, climbing surfaces, slide areas, straps, D-rings, and visible PVC panels before operation. Follow manufacturer instructions for inflation, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Jungle Joe TR carries a 3-year limited commercial fleet protection warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the intended water location provides at least 8 ft of depth and space for the 19 ft 8 in by 14 ft 9 in by 12 ft 6 in module. Plan for no more than ten users, maintain 2.0 to 2.5 PSI operating pressure, use Vario-Lock 10 compatible connections, account for the 282 lbs dry weight, and arrange four mooring points.