Aquaglide King Of The Mountain Slide

Description

During climbing, jumping, and slide activity, theAquaglide King of the Mountainprovides a 14 ft 9 in by 13 ft 1 in commercial tower hub with room for six concurrent users. Its Duratex reinforced PVC construction uses HA Weld seam technology. The module requires an 8 ft minimum water-depth clearance zone.

Vario-Lock 10 provides the listed four-sided modular connection system. Four reinforced stainless steel D-rings form the mooring points. The inflatable structure operates between 2.0 and 2.5 PSI and weighs 137 lbs when dry.

Key Features of the King of the Mountain Slide

• Duratex reinforced PVC forms the listed climbing tower, jumping deck, and slide-hub construction.
• HA Weld technology provides the listed hot-air welded seam system.
• Inflated dimensions measure 13 ft 9 in by 13 ft 1 in by 6 ft 7 in.
• Up to six users can occupy the module at the same time.
• An 8 ft minimum water depth provides the listed safety-clearance zone.
• Operating pressure ranges from 2.0 to 2.5 PSI for the inflatable structure.
• Vario-Lock 10 supports the listed four-sided modular layout compatibility.
• Four reinforced stainless steel D-rings provide the listed mooring points.
• The 137 lbs dry weight supports transport and water-based setup planning.

Use and Capacity

The King of the Mountain is classified as an Aquapark extreme climbing tower, jumping deck, and slide hub. It supports up to six concurrent users. The required 8 ft water depth provides the listed clearance zone around the 6 ft 7 in-high inflated structure.

Operators should maintain the listed 2.0 to 2.5 PSI inflation range and use Vario-Lock 10 compatible connections for modular layouts. The available product details do not list a pump, anchor system, mooring lines, repair kit, safety equipment, or specific connected modules as included.

Materials and Construction

Duratex commercial reinforced PVC forms the listed inflatable tower. HA Weld hot-air welded seams provide the listed seam technology. Vario-Lock 10 straps and four reinforced stainless steel D-rings form the listed connection and mooring hardware.

Water, salt, sand, sunscreen residue, and debris can still collect around PVC panels, climbing surfaces, slide areas, seams, D-rings, straps, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, interconnection, mooring, cleaning, and storage.

Installation and Setup

The Aquaglide tower inflates to 13 ft 9 in by 13 ft 1 in by 6 ft 7 in and weighs 137 lbs when dry. Installers should select a location with at least 8 ft of water depth, allow room for the full tower footprint, plan the Vario-Lock 10 layout, and identify mooring positions before deployment.

Inflate the structure within the listed 2.0 to 2.5 PSI range. The provided product data does not confirm a pump, anchors, mooring lines, repair kit, safety equipment, or connection modules as included.

Care and Operating Notes

Rinse the PVC structure, climbing surfaces, slide areas, D-rings, Vario-Lock straps, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris before storage or reinflation. Inspect seams, valves, climbing areas, slide surfaces, straps, D-rings, and visible PVC panels before operation. Follow manufacturer instructions for inflation, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The King of the Mountain carries a 3-year limited commercial warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the intended water location provides at least 8 ft of depth and space for the 13 ft 9 in by 13 ft 1 in by 6 ft 7 in tower. Plan for no more than six concurrent users, maintain 2.0 to 2.5 PSI operating pressure, use Vario-Lock 10 compatible connections, and account for the 137 lbs dry weight during setup.