Aquaglide Ocean Pool (6m x 5m)

Description

A larger floating enclosure frame gives theAquaglide Ocean Pool 6m x 5ma superyacht swimming-platform configuration with a protected interior area. The exterior platform measures 19.7 ft by 16.4 ft, while the usable pool area measures 17.1 ft by 13.8 ft. Its 4 in high-pressure drop-stitch frame includes EVA traction decking.

An 8 ft-deep weighted fine-mesh net forms the listed anti-jellyfish barrier. Heavy-duty 316 stainless steel D-rings provide the mooring points. The platform operates within the listed 6.0 to 8.0 PSI inflation range and weighs 137 lbs when dry.

Key Features of the Ocean Pool 6m x 5m

• A 19.7 ft by 16.4 ft exterior frame defines the floating swimming enclosure.
• The usable interior pool area measures 17.1 ft by 13.8 ft.
• A 4 in drop-stitch frame provides the listed high-pressure rigid platform construction.
• EVA traction decking forms the listed standing surface on the floating frame.
• An 8 ft-deep fine-mesh net forms the listed weighted enclosure barrier.
• The enclosure net is identified for anti-jellyfish protection.
• Operating pressure ranges from 6.0 to 8.0 PSI for the platform frame.
• Marine-grade 316 stainless steel D-rings provide the listed mooring points.
• The 137 lbs dry weight supports handling and water-based deployment planning.

Use and Capacity

The Ocean Pool 6m x 5m is classified as a superyacht floating safe swimming enclosure platform. Its exterior footprint measures 6.0 m by 5.0 m, while the usable interior pool area measures 5.2 m by 4.2 m. The weighted fine-mesh barrier extends 2.4 m below the floating frame.

Operators should maintain the listed 6.0 to 8.0 PSI pressure range for the drop-stitch platform. The available product details do not list user capacity, water-depth requirements, a pump, anchor system, mooring lines, repair kit, or safety equipment.

Materials and Construction

A 4 in high-pressure drop-stitch frame forms the listed rigid platform, while EVA traction decking provides the listed standing surface. The weighted fine-mesh net extends 8 ft below the platform and is identified for anti-jellyfish protection. Heavy-duty 316 stainless steel D-rings form the listed mooring points.

Water, salt, sand, sunscreen residue, and debris can still collect on the EVA decking, drop-stitch frame, netting, D-rings, seams, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, mooring, net handling, cleaning, and storage.

Installation and Setup

The Aquaglide Ocean Pool measures 19.7 ft by 16.4 ft externally and weighs 137 lbs when dry. Installers should select a suitable water location, allow for the 8 ft net depth, identify mooring positions, and maintain clear access around the swimming enclosure before deployment.

Inflate the drop-stitch platform within the listed 6.0 to 8.0 PSI range. The provided product data does not confirm a pump, anchors, mooring lines, repair kit, or safety equipment as included.

Care and Operating Notes

Rinse the EVA deck surface, platform frame, fine-mesh net, D-rings, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris from the net and frame before storage or reinflation. Inspect the net, D-rings, seams, valves, and visible platform surfaces before operation. Follow manufacturer instructions for inflation, mooring, net care, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Ocean Pool 6m x 5m carries a 3-year limited commercial warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the intended water location allows for the 19.7 ft by 16.4 ft exterior frame, 8 ft weighted-net depth, and suitable mooring positions. You should maintain 6.0 to 8.0 PSI platform pressure, account for the 137 lbs dry weight during deployment, and plan around the 17.1 ft by 13.8 ft usable interior swimming area.