Aquaglide Rebound Bouncer 20 Aquapark w/ I-Log and Plunge Slide

Description

Combine a bouncer, balance beam, slide, and boarding platform in one layout with theAquaglide Rebound 20 Aquaparkbundle. The complete system includes a 20 ft Rebound Bouncer, I-Log balance beam, Plunge Slide, and Swimstep platform. Its total setup footprint measures 27 ft 11 in by 19 ft 8 in.

The Duratex 0.90 mm reinforced PVC bundle supports up to seven simultaneous users within a stated 1,400 lbs combined capacity. Three multi-point stainless steel anchor D-rings form the mooring points. The system requires an 8 ft water-depth clearance zone and weighs 159 lbs combined.

Key Features of the Rebound 20 Aquapark Bundle

• The bundle includes a 20 ft Rebound Bouncer, I-Log, Plunge Slide, and Swimstep platform.
• A 27 ft 11 in by 19 ft 8 in footprint defines the complete system setup area.
• Duratex 0.90 mm reinforced PVC forms the listed modular water-park bundle construction.
• Seven users can occupy the system within the listed 1,400 lbs combined capacity.
• An 8 ft minimum water depth provides the listed clearance-zone requirement.
• Three multi-point stainless steel D-rings form the listed system mooring points.
• The 159 lbs combined dry weight supports transport and deployment planning.

Use and Capacity

The Rebound 20 Aquapark is classified as a complete modular inflatable water-park bundle system. It combines a bouncer, balance beam, slide, and boarding platform in the listed package. The system supports up to seven simultaneous users within the listed 1,400 lbs combined capacity.

The required 8 ft water depth provides the listed clearance zone. The available product details do not list inflation pressures, a pump, anchor system, mooring lines, repair kit, or safety equipment.

Materials and Construction

Duratex 0.90 mm, 1000-denier reinforced PVC forms the listed bundle construction. The Rebound Bouncer, I-Log balance beam, Plunge Slide, and Swimstep platform form the listed system components. Three multi-point stainless steel D-rings provide the listed mooring points.

Water, salt, sand, sunscreen residue, and debris can still collect around the bouncer, balance beam, slide, boarding platform, D-rings, seams, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, connection, mooring, cleaning, and storage.

Installation and Setup

The Aquaglide bundle requires a 27 ft 11 in by 19 ft 8 in setup footprint and weighs 159 lbs combined when dry. Installers should choose a location with at least 8 ft of water depth, allow room for the full system and clearance zone, position the included modules, and identify three mooring points before deployment.

The provided product data does not state individual module inflation pressures or confirm a pump, anchors, mooring lines, repair kit, or safety equipment as included.

Care and Operating Notes

Rinse the bouncer, I-Log, slide, Swimstep platform, D-rings, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris before storage or reinflation. Inspect each module, D-rings, seams, valves, and visible PVC surfaces before operation. Follow manufacturer instructions for inflation, module connection, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Rebound 20 Aquapark bundle carries a 3-year limited commercial fleet protection warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the intended water location provides at least 8 ft of depth and room for the 27 ft 11 in by 19 ft 8 in bundle footprint. Plan for no more than seven users within the 1,400 lbs combined capacity, account for the 159 lbs combined dry weight, and arrange three mooring points for the listed system.