Aquaglide Splashmat 18′ Floating Platform

Description

Connect low-profile Aquapark sections with theAquaglide Splashmat 18, an 18 ft modular link and floating play platform for up to six simultaneous transit users. Its heavy-duty reinforced commercial PVC construction uses a non-drop-stitch structure with a 3 in inflated profile. The platform weighs 40 lbs when dry.

Inter-lock heavy-duty structural straps provide the listed connection system. Four marine-grade stainless steel D-rings form the mooring points. The mat operates within the listed 1.5 to 2.0 PSI inflation range.

Key Features of the Splashmat 18 Platform

• An 18 ft by 4 ft 11 in footprint forms the listed modular link and play platform.
• Heavy-duty reinforced commercial PVC provides the listed non-drop-stitch inflatable construction.
• Up to six users can transit the low-profile platform at the same time.
• Operating pressure ranges from 1.5 to 2.0 PSI for the listed structure.
• Inter-lock straps provide the listed heavy-duty structural connection system.
• Four marine-grade stainless steel D-rings provide the listed mooring points.
• The 40 lbs dry weight supports handling and water-based deployment planning.

Use and Capacity

The Splashmat 18 is classified as an economic modular link and low-profile floating play platform. It supports up to six simultaneous transit users. Inter-lock heavy-duty straps provide the listed structural connection method for compatible module layouts.

Operators should maintain the listed 1.5 to 2.0 PSI inflation range. The available product details do not list water-depth requirements, a pump, anchor system, mooring lines, repair kit, safety equipment, or specific compatible modules as included.

Materials and Construction

Heavy-duty reinforced commercial-grade PVC forms the listed non-drop-stitch inflatable structure. Inter-lock straps provide the listed structural connection system. Four marine-grade stainless steel D-rings form the listed mooring points.

Water, salt, sand, sunscreen residue, and debris can still collect around PVC surfaces, D-rings, connection straps, seams, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, interconnection, mooring, cleaning, and storage.

Installation and Setup

The Aquaglide platform inflates to 18 ft by 4 ft 11 in by 3 in and weighs 40 lbs when dry. Installers should plan the Inter-lock connection layout, allow room for the full platform length, and identify four mooring positions before deployment.

Inflate the platform within the listed 1.5 to 2.0 PSI range. The provided product data does not confirm a pump, anchors, mooring lines, repair kit, safety equipment, or connection modules as included.

Care and Operating Notes

Rinse the PVC platform, Inter-lock straps, D-rings, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris before storage or reinflation. Inspect the deck surface, straps, D-rings, seams, valves, and visible PVC panels before operation. Follow manufacturer instructions for inflation, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Splashmat 18 carries a 3-year limited commercial fleet protection warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the planned Aquapark layout uses Inter-lock compatible connections and has room for the 18 ft by 4 ft 11 in platform. Plan for no more than six simultaneous transit users, maintain 1.5 to 2.0 PSI operating pressure, account for the 40 lbs dry weight, and arrange four mooring points.