Aquaglide Tango

Description

During compact Aquapark circuit setup, theAquaglide Tangoprovides a low-profile balance beam and obstacle-link hub with four-sided Vario-Lock 6 integration. The Duratex 0.90 mm reinforced PVC module inflates to 6 ft 7 in by 6 ft 7 in by 1 ft 4 in and supports two concurrent users.

The operating chamber uses the listed 2.0 PSI pressure. Two marine-grade stainless steel D-rings provide the mooring points. The module requires a 4 ft water-depth clearance zone and weighs 31 lbs when dry.

Key Features of the Tango Balance Hub

• Duratex 0.90 mm reinforced PVC forms the listed compact balance-beam and obstacle-link construction.
• Inflated dimensions measure 6 ft 7 in by 6 ft 7 in by 1 ft 4 in.
• Two users can occupy the compact balance module at the same time.
• A 4 ft minimum water depth provides the listed safety-clearance zone.
• The inflatable chamber operates at the listed 2.0 PSI pressure.
• Vario-Lock 6 provides the listed four-sided perimeter integration system.
• Two marine-grade stainless steel D-rings provide the listed mooring points.
• The 31 lbs dry weight supports handling and water-based deployment planning.

Use and Capacity

The Tango is classified as an Aquapark Series compact balance beam and obstacle-link hub. It supports up to two concurrent users. The required 4 ft water depth provides the listed clearance zone around the 1 ft 4 in-high inflated module.

Operators should maintain the listed 2.0 PSI chamber pressure and use Vario-Lock 6 compatible connections for four-sided perimeter layouts. The available product details do not list a pump, anchor system, mooring lines, repair kit, or safety equipment as included.

Materials and Construction

Duratex 0.90 mm commercial-grade reinforced PVC forms the listed low-profile obstacle structure. Vario-Lock 6 straps provide the listed four-sided connection system. Two marine-grade stainless steel D-rings form the listed mooring points.

Water, salt, sand, sunscreen residue, and debris can still collect around PVC surfaces, balance areas, D-rings, straps, seams, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, interconnection, mooring, cleaning, and storage.

Installation and Setup

The Aquaglide balance hub inflates to 6 ft 7 in by 6 ft 7 in by 1 ft 4 in and weighs 31 lbs when dry. Installers should choose a location with at least 4 ft of water depth, allow room for the compact module footprint, plan the Vario-Lock 6 layout, and identify two mooring positions before deployment.

Inflate the chamber to the listed 2.0 PSI operating pressure. The provided product data does not confirm a pump, anchors, mooring lines, repair kit, safety equipment, or connection modules as included.

Care and Operating Notes

Rinse the PVC structure, balance surfaces, D-rings, Vario-Lock straps, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris before storage or reinflation. Inspect seams, valves, balance surfaces, straps, D-rings, and visible PVC panels before operation. Follow manufacturer instructions for inflation, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Tango carries a 3-year limited commercial fleet protection warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the intended water location provides at least 4 ft of depth and space for the 6 ft 7 in by 6 ft 7 in by 1 ft 4 in balance hub. Plan for no more than two concurrent users, maintain 2.0 PSI chamber pressure, use Vario-Lock 6 compatible connections, and account for the 31 lbs dry weight during setup.