Aquaglide Zulu Inflatable Commercial Water Park Slide

Description

Delivering a 400 lbs total user limit, theAquaglide Zulucombines a commercial floating water slide with a climbing tower in an 11 ft by 6 ft 6 in footprint. Duratex 1100-denier PVC and RF thermo-fused seams form the listed inflatable construction. The module supports two concurrent users.

Two independent safety float chambers operate at the listed 1.2 PSI pressure. Twelve molded handles and ladder steps support boarding, while four 316 stainless steel D-rings provide the listed anchor points. the listed 5 ft 9 in minimum water depth defines the landing-zone clearance requirement.

Key Features of the Zulu Water Slide

• Duratex 1100-denier PVC forms the listed commercial floating slide and climbing-tower construction.
• RF thermo-fused seams provide the listed welded seam technology.
• Two users can occupy the module within the listed 400 lbs total load limit.
• An 11 ft by 6 ft 6 in footprint defines the listed setup area.
• A 5 ft 9 in minimum water depth provides the listed landing-zone clearance.
• Two independent float chambers operate at the listed 1.2 PSI pressure.
• Twelve molded handles and ladder steps provide the listed boarding hardware.
• Four 316 stainless steel D-rings form the listed mooring attachment points.
• EN ISO 25649 compliance and TÜV certified directives are stated.
• The 73 lbs dry weight supports handling and deployment planning.

Use and Capacity

The Zulu is classified as a modular commercial floating water slide and climbing tower. It supports two concurrent users within the listed 400 lbs total load limit. The required 5 ft 9 in water depth provides the listed landing-zone clearance beneath the inflated structure.

Operators should maintain the listed 1.2 PSI pressure across the two independent safety float chambers. The available product details do not list a pump, anchor system, mooring lines, repair kit, safety equipment, or connection straps as included.

Materials and Construction

Duratex 0.9 mm, 1100-denier PVC forms the listed commercial inflatable structure. RF thermo-fused welded seams provide the listed seam technology. Twelve molded handles, ladder steps, and four 316 stainless steel D-rings form the listed boarding and mooring hardware.

Water, salt, sand, sunscreen residue, and debris can still collect around PVC panels, slide surfaces, seams, handles, ladder steps, D-rings, and valves. Rinse and inspect the product regularly. Follow manufacturer guidance for inflation, anchoring, cleaning, and storage.

Installation and Setup

The Aquaglide slide has an 11 ft by 6 ft 6 in setup footprint and weighs 73 lbs when dry. Installers should select a location with at least 5 ft 9 in of water depth, provide room for slide and climbing access, and identify four mooring points before deployment.

Inflate both chambers to the listed 1.2 PSI operating pressure. The provided product data does not confirm a pump, anchors, mooring lines, repair kit, safety equipment, or connection straps as included.

Care and Operating Notes

Rinse the slide surface, climbing area, ladder steps, handles, D-rings, seams, and inflation valves with fresh water after use. Remove salt, sand, sunscreen residue, and debris before storage or reinflation. Inspect chambers, seams, handles, steps, D-rings, valves, and visible PVC panels before operation. Follow manufacturer instructions for inflation, repairs, cleaning products, storage, and approved replacement parts.

Warranty and Support

The Zulu carries a 3-year limited commercial fleet protection warranty. Coverage follows the manufacturer’s stated warranty terms and may be subject to exclusions, conditions, and registration requirements.

Before Ordering

Confirm that the intended water location provides at least 5 ft 9 in of depth and room for the 11 ft by 6 ft 6 in module. Plan for no more than two users within the 400 lbs total load limit, maintain 1.2 PSI across both float chambers, account for the 73 lbs dry weight, and arrange four suitable mooring points.