CTM Marine CT-6 6000 BTU Self-Contained Boat A/C

Description

Small forward cabins and crew quarters usually benefit from equipment sized around the space rather than oversized salon capacity. The CTM Marine CT-6 delivers 6,000 BTU/h of cooling and 6,000 BTU/h of reverse-cycle heating from a 115V self-contained direct-expansion marine AC system. Its application guidance covers compact V-berths, aft crew quarters, and small cuddy cabins on boats measuring approximately 18 to 28 feet.

Key Features

• Provides 6,000 BTU/h cooling for compact marine cabin spaces.
• Adds 6,000 BTU/h heating through reverse-cycle operation.
• Operates on 115V power for compatible single-phase vessels.
• Delivers 250 CFM airflow through a four-inch blower collar.
• Uses 180 GPH seawater flow for marine heat exchange.
• Provides digital display control through an RJ12 controller connection.

Technical Specifications

• Model: CT-6-115V or 10034A, CT Series
• Cooling capacity: 6,000 BTU/h or 1.75 kW
• Heating capacity: 6,000 BTU/h with reverse-cycle heating
• Electrical supply: 115V AC, 60 Hz, single phase
• Running current: 4.9 A cooling and 5.6 A heating
• Breaker requirement: 15 A recommended with 23 A LRA
• Refrigerant and compressor: R-410A with hermetic rotary compressor
• Seawater flow: 180 GPH through five-eighth-inch connections
• Airflow and duct: 250 CFM through a four-inch collar
• Dimensions and weight: 16.1 x 11.2 x 11.2 inches; 40 lbs

Application and Installation Notes

The CTM CT-6 is intended for compact forward V-berths, standalone aft crew quarters, and small cuddy cabins on approximately 18 to 28-foot boats. Confirm the 115V supply, 15 A breaker, minimum 180 GPH seawater loop, four-inch rotatable blower collar, RJ12 controller connection, half-inch condensate route, and service clearance before installation. The lightweight stainless steel pan supports planning for compact equipment spaces.

Who This Unit Is Not Ideal For

This unit is not suitable for 230V-only vessels, large salons, or spaces requiring more than 6,000 BTU/h. It may also be unsuitable where the available system cannot support the heating current or specified seawater flow. Actual sizing should consider cabin insulation and heat load.

Warranty and Product Summary

The supplied data does not specify a factory warranty for the CTM CT-6. This 115V self-contained system combines 6,000 BTU/h cooling and heating, digital display control, compact dimensions, and cupronickel condenser construction.