Webasto FCF Classic 16000 BTU 230V Boat A/C Unit

Description

The Webasto FCF Classic 16000 BTU 230V Boat A/C Unit eliminates frustrating cabin humidity and extreme weather temperature swings across mid-size vessel main salons, large master staterooms, express cruisers, and enclosed bridge configurations navigating global 230V power networks. Operating on a single phase 230 Volts AC platform, this self-contained direct-expansion marine air conditioner coordinates a standard legacy hermetic rotary compressor to replace bulky dual-system heating and cooling blocks entirely. Vessel skippers can navigate volatile coastal channels comfortably, letting the automated reverse cycle heat pump mode maintain perfect interior tracking profiles flawlessly during both hot summer runs and winter freeze cycles.

Featuring a corrosion-resistant cupronickel coaxial heat exchanger tube, the robust climate engine maintains a minimum 250 GPH sea water flow rate loop to prevent internal component degradation. The advanced system drives powerful thermodynamic cycles through an expanded 6.0″ high-velocity air discharge collar, managing a 62.8 lbs package over an epoxy-coated steel structural baseline pan cleanly. Procuring this premium Germany-manufactured reverse cycle heat pump secures elite climate tracking via digital display control units and tethered multi-speed wall controller panels, backed by a comprehensive 2-Year factory limited component protection warranty.

Key Features of Webasto FCF Classic 16000 230V

• Self-Contained Direct-Expansion Reverse Cycle Heat Pump links high-capacity cooling, active reverse-cycle heating, and under-unit moisture control into a singular high-performance terminal.
• 16000 BTU/h Cooling and Heating Capacity Matrix supplies immense thermal regulation metrics to clarify main saloon atmospheres and stabilize temperatures rapidly under high occupancy.
• Standard Legacy Hermetic Rotary Compressor Core handles massive thermal compression demands smoothly to minimize noise and cabin vibration patterns during long operational intervals.
• Corrosion-Resistant Cupronickel Coaxial Heat Exchanger Tube shields internal copper galleries from raw saltwater pitting using a heavy-duty 90/10 marine-alloy configuration loop.
• Expanded 6.0″ High-Velocity Air Discharge Collar forces massive cubic feet per minute airflow patterns down duct corridors to achieve immediate temperature updates.
• Pre-Charged Environmentally Graded R-410A Gas maximizes thermodynamic cycle performance while fulfilling international ozone-safe environmental emission standards.
• Digital Display Control Unit Panel interfaces seamlessly via a tethered multi-speed wall controller panel to stream exact real-time temperature modifications down to the master logic board.
• Oversized 5/8″ Outer Diameter Hose Barb Connections provide overbuilt plumbing connection nodes designed to accept standard reinforced marine seawater hoses securely.
• Epoxy-Coated Steel Structural Baseline Pan seals against under-unit condensation leaks while stopping standard tray breakdown from bilge humidity.
• Optimized 230V Electrical Configuration Matrix draws an efficient 5.4 Amps on cooling and 6.2 Amps on heating to conserve baseline generator current capacities under full load.

In the Box

• 1x Webasto FCF Classic 16000 BTU 230V Marine AC Unit
• 1x Digital Display Multi-Speed Wall Control Panel
• 1x Remote Interface Connecting Data Ribbon Harness
• 1x Epoxy-Coated Steel Condensation Base Pan Drain Fitting Pack
• 1x Technical Installation Blueprint Manual and System Wiring Diagram

Reverse Cycle Climate Automation Shields Express Cruisers

Designed for mid-size vessel main salons and enclosed bridge configurations ranging from 30 to 42 feet, this self-contained reverse cycle climate system ensures dependable environmental monitoring. The rugged cupronickel layout coupled with comprehensive 2-Year factory limited mechanical component protection shields owners from unexpected system breakdowns and expensive replacement bills. Clearing the seawater strainer basket weekly and flushing the condenser coil blocks with fresh water during seasonal care preserves pristine thermal conductivity, keeping your marine climate investment operating flawlessly season after season.