Garmin Reactor 40 Kicker Autopilot w/o GHC 20 Display

Garmin Reactor 40 Kicker Motor Autopilot Corepack

Walleye tournament rigs track precise trolling speeds behind the Garmin Reactor 40 kicker autopilot, using a solid-state 9-axis AHRS, GHC 50 touchscreen, and electronic throttle servo to command 9.9HP-to-15HP auxiliary motors at 12V.

Solid-state 9-axis AHRS prevents compass drift
Electronic servo manages fine-tune trolling throttle
5-inch GHC 50 touchscreen simplifies control
Link arm clamps 9.9HP-to-15HP outboards

$1,597.00

Products are almost sold out

This product is about to run out

available only:

In Stock

Wholesale Price

Request for Quotation

Add to wishlist

Compare

SKU: GRM-R40-KICK-NC Category: Marine Autopilots Brand: Garmin

SKU:

GRM-R40-KICK-NC

Description

The Garmin Reactor 40 Kicker Motor Autopilot Corepack, SKU 010-02794-03, is a digital steer-by-wire autopilot corepack with a GHC 50 touchscreen display rather than a dedicated kicker-motor package. It is designed for compatible electronic steer-by-wire systems and includes the Reactor 40 CCU, ECU, GHC 50 autopilot instrument, connection cables, and NMEA 2000 components. A compatible Garmin chartplotter is required for full operation and setup.

This corepack is compatible with approved electronic steering platforms such as SeaStar Optimus, Yanmar Marine ZT370 electronic power steering, and ZF 2800 pod drives. It does not include a kicker steering actuator, throttle actuator, tilt-tube hardware, or mechanical link arm. Verify the exact installed steer-by-wire platform and required manufacturer gateway before purchase.

Key Specifications

Garmin Reactor 40 steer-by-wire standard corepack with GHC 50 touchscreen display, SKU 010-02794-03.
Designed for compatible electronic steer-by-wire systems, not conventional kicker-motor steering systems.
Includes Reactor 40 CCU, ECU, GHC 50 display, connection cables, and NMEA 2000 components.
Requires a compatible Garmin chartplotter for complete operation and configuration.
Supports approved steering platforms including SeaStar Optimus, Yanmar Marine ZT370 electronic power steering, and ZF 2800 pod drives.
Uses a solid-state nine-axis AHRS for heading and vessel-motion sensing.
Uses NMEA 2000 networking and the required manufacturer-specific steer-by-wire interface or gateway.
Does not include a kicker drive actuator, throttle servo, mechanical link arm, tilt tube, hydraulic pump, or steering cylinder.

System Integration

Despite the product title supplied, SKU 010-02794-03 is not the Garmin Reactor 40 Kicker Autopilot Corepack. It is a Reactor 40 steer-by-wire corepack with GHC 50. Kicker installations require a dedicated Garmin Reactor 40 Kicker package with compatible outboard steering and throttle-actuation hardware.

Confirm the installed SeaStar Optimus, Yanmar ZT370, ZF 2800 pod, or other approved steering platform; required gateway; compatible Garmin chartplotter; software versions; network topology; and vessel power supply before ordering. Do not use this product to retrofit mechanical cable steering, hydraulic steering, or a conventional auxiliary kicker outboard.

Installation Considerations

Mount the CCU away from magnetic interference, high-current cables, engines, speakers, and vibration. Install the ECU in a protected accessible location and mount the GHC 50 at the helm with adequate rear clearance. Route NMEA 2000, power, and approved steering-interface cables according to Garmin and steering-system manufacturer documentation, then complete dockside configuration and sea-trial verification.

Before Ordering

Confirm the exact compatible steer-by-wire platform, required gateway or interface, compatible Garmin chartplotter, GHC 50 helm mounting space, CCU sensor location, ECU mounting location, NMEA 2000 backbone, vessel power supply, software compatibility, and complete Garmin plus steering-manufacturer installation requirements before purchase.

Garmin Reactor 40 Kicker Motor Autopilot Corepack

Brand	Garmin
Full Model SKU/Code	010-02794-03 (Reactor 40 Kicker)
Country of Origin	Taiwan
Component Type	Complete Kicker Corepack System (Includes CCU, ECU, GHC 50, Link Arm, Throttle Actuator)
Vessel Hull Type Compatibility	Small Fishing Boats, Walleye Rigs, Multi-Species Hulls
Steering System Type Compatibility	Small Outboard Auxillary Kicker Tiller/Remote Systems
Operating Voltage	12 Volts DC
Data Networking Protocols	NMEA 2000 System Core Linkage
Heading Sensor / Compass Technology	Solid-State 9-Axis Attitude Heading Reference System (AHRS)
Heading Accuracy	+/- 1° Static / Dynamic Compass Deviation
Drive Unit Compatibility / Output Current	Included High-Precision Steering Actuator and Electronic Throttle Control Servo Link Unit
Display Technology & Size	GHC 50 5" High-Resolution Premium WVGA Touchscreen LCD
Waterproof Rating	IPX7 For Open Cockpit Deck Mount Protection
Maximum Current Draw	Full Transient Steering Lock Response: Max 10 Amps Intermittent Peak Draw
Calibration Method	Garmin Dockside Wizard and Kicker System Tuning Setup Interface
Smart Technology Features	Integrated Remote Throttle Adjustment, Fine-Tune Precision Speed Control Trolling Patterns, Anchor Lock Support
Dry Weight	2.9 kg / 6.4 lbs (Combined Kit Components)
Application	Small auxiliary kicker motors (9.9 HP to 15 HP) operating as secondary precision trolling units on fishing vessels (18-30 ft primary boat lengths)