SI-TEX SP-80 – Control Head Only

Description

Configure a compatible SI-TEX autopilot installation with the SI-TEX SP-80 Control Head, a digital multi-button interface for SP-80 and SP-110 processor systems. The 110 mm square controller supports flush mounting or surface-bracket installation and connects through a multi-core network cable. A 12V to 24V DC operating supply supports the control head, while NMEA 0183 input and output provide the stated data connection.

The impact-resistant polycarbonate housing has IPX6 front-panel protection and operates from minus 10°C to 55°C. Typical draw is 0.5A, and the controller weighs 0.5 kg. A transflective high-visibility LCD provides the stated display format. The package includes a sun cover and mounting hardware, while the processor, steering drive, heading sensor, and complete autopilot installation remain separate requirements.

Key Specifications of the SI-TEX SP-80 Control Head

• The SP-80 control head provides a digital multi-button interface for compatible SI-TEX SP-80 and SP-110 autopilot processor systems.
• A transflective high-visibility LCD forms the stated display interface for autopilot control at the selected flush or bracket-mounted helm location.
• Flush or surface-bracket mounting accommodates a 110 mm square face, requiring suitable panel space, cable clearance, and viewing position.
• Operating voltage supports 12V to 24V DC systems, while typical current draw is 0.5A for power-planning purposes.
• NMEA 0183 input and output provide the documented data-link connection for compatible navigation and autopilot system equipment.
• An impact-resistant polycarbonate housing with IPX6 front protection operates from minus 10°C to 55°C under the supplied specification.
• The 0.5 kg control head includes a sun cover and mounting hardware for the documented display installation configuration.

System Integration and Control

This SI-TEX SP-80 control head does not include a course computer, steering drive, heading sensor, hydraulic pump, or full autopilot system. It works with compatible SP-80 or SP-110 processor units, which determine drive capacity and the maximum supported hydraulic-cylinder volume. The selected vessel steering arrangement and connected navigation devices must be evaluated with the complete system.

Confirm the intended flush or bracket mounting location, 110 mm square face space, multi-core cable route, 12V or 24V power supply, and NMEA 0183 connections before installation. The display provides the control interface, while steering performance and available modes depend on the connected processor, drive, sensor, and commissioning configuration.

Why Choose the SI-TEX SP-80 Control Head

The SI-TEX SP-80 Control Head adds a 110 mm square digital control interface to a compatible SP-80 or SP-110 autopilot system. Its transflective LCD, multi-button controls, NMEA 0183 input and output, 12V to 24V supply range, 0.5A typical draw, IPX6 front protection, flush or surface mounting, 0.5 kg weight, and included sun cover support a fitment-focused autopilot control-station decision.

Setup and Network Considerations

Confirm that the vessel has a compatible SI-TEX SP-80 or SP-110 processor before selecting this control head. Plan the 110 mm square flush or surface-bracket location, rear clearance, multi-core cable path, 12V or 24V supply, NMEA 0183 input and output links, and access to the control buttons. Follow SI-TEX documentation for processor connection, display setup, steering-drive selection, and full autopilot commissioning.

Warranty and Support

SI-TEX warranty terms vary by product and region, and the supplied specifications do not provide a named warranty period for the SP-80 Control Head. Mulmarine.com can help you review processor compatibility, display-mounting space, power requirements, NMEA 0183 links, cable routing, and required steering-drive and sensor components before purchase. Review the applicable SI-TEX warranty coverage and documented package contents before ordering.

Before Ordering the SI-TEX SP-80 Control Head

Confirm that your vessel has, or will include, a compatible SI-TEX SP-80 or SP-110 processor, steering drive, heading sensor, and complete autopilot system. You should verify the 110 mm square mounting space, flush or bracket configuration, 12V or 24V supply, 0.5A typical draw, multi-core cable routing, NMEA 0183 requirements, and supplied sun-cover and mounting-hardware details before purchase.