TAILFIN Remote Kicker Steering System

Description

The TAILFIN Remote Kicker Steering System is a wireless electromechanical steering system for compatible kicker outboards up to 25 horsepower. It uses a 12V actuator and handheld remote to move the kicker motor through a snap-on mechanical linkage, allowing the operator to steer a trolling or closed-throttle cruising kicker from elsewhere on the boat. It is a remote steering system, not a GPS autopilot, and does not provide automatic course holding, route following, or chartplotter navigation control.

The package includes the TAILFIN actuator, wireless handheld remote, and mounting kit. Adjustable speed and sensitivity settings allow the user to tailor steering response for the boat and trolling conditions. Confirm the kicker outboard model, horsepower, bracket and transom configuration, steering-arm clearance, linkage fitment, and available 12V power before purchase.

Key Specifications

• Wireless 12V kicker-motor steering system for compatible outboards up to 25 horsepower.
• Includes a TAILFIN actuator, wireless handheld remote, and mounting kit.
• Provides remote manual steering control through a reversible electric actuator and mechanical linkage.
• Does not include GPS autopilot functions, route following, heading hold, chartplotter integration, or automatic steering control.
• Uses adjustable steering speed and sensitivity settings for trolling and closed-throttle cruising control.
• Uses a quick-release snap-on linkage for compatible kicker-motor installations.
• Typical active steering draw is listed at 1.5A to 3A, with up to 8A maximum load on a 12V system.
• Designed for saltwater use with a weather-resistant actuator and engine-mounted bracket arrangement.

System Integration

The TAILFIN works independently from a marine autopilot and does not need a course computer, heading sensor, display, NMEA 2000 network, or hydraulic pump. It provides wireless steering control only. The operator remains responsible for steering, navigation, throttle control, lookout, and safe vessel operation.

Check whether the kicker motor can move freely through its full steering range with the actuator fitted. Confirm compatibility with the kicker bracket, motor cowling, primary engine position, transom layout, tie bar where fitted, and intended remote-control operating area.

Installation Considerations

Mount the actuator and linkage so they cannot bind, over-travel, strike the transom or engine bracket, interfere with tilt operation, or restrict manual steering. Route the 12V wiring away from heat, chafe, fuel-system components, and moving engine parts. Test remote range, port and starboard response, adjustable speed settings, quick-release operation, and full manual control before using the system on the water.

Before Ordering

Confirm a compatible kicker outboard up to 25 horsepower, engine model and mounting configuration, available steering-arm clearance, transom-bracket compatibility, full tilt and steering movement, 12V supply, 8A circuit capacity, protected cable route, remote operating range, and required mounting hardware before purchase.