Mastervolt ChargeMaster 24/60-3 Marine Battery Charger – 24V, 60 Amp, 3 Battery Outlets

Description

TheMastervolt ChargeMaster 24/60-3 Marine Battery Chargeris an AC-powered charger that provides up to 60 amps of 24V DC charging output across three isolated battery-bank connections. It accepts universal 90V to 265V AC input and is specified for 24V power yachts and commercial craft with multiple 24V battery banks.

The charger supports AGM, gel, flooded, and manually selected Li-ion batteries through its 3-Stage+ smart charging program. the listed absorption voltage is 28.5V, while the float maintenance voltage is 26.5V. An included sensor supports temperature compensation, and MasterBus compatibility, ignition protection, full DC/AC electronic protection, and variable-speed internal fan cooling are listed.

Key Specifications of the Mastervolt ChargeMaster 24/60-3 Charger

• 60-amp output supports listed 24V power-yacht and commercial-craft charging applications.
• Three isolated banks allow one charger to connect to up to three separate 24V battery banks.
• 24V DC output matches the listed destination battery-system voltage.
• Universal 90V to 265V AC input supports compatible AC power sources.
• AGM, gel, flooded, and manually selected Li-ion batteries are listed as compatible.
• 3-Stage+ smart charging manages the listed charging sequence.
• 28.5V absorption is the listed higher-voltage charging stage.
• 26.5V float is the listed maintenance charging stage.
• MasterBus compatibility supports the listed system communication function.
• A variable-speed internal fan manages operating heat during charging.

Battery and Charging Compatibility

The Mastervolt ChargeMaster 24/60-3 is listed for AGM, gel, flooded, and manually selected Li-ion batteries in 24V systems. Its three isolated outputs allow one charger to connect to up to three separate 24V battery banks.

It takes AC input power and converts it into controlled 24V DC charging output. The three-bank design is useful where separate 24V battery banks must be maintained, but each connected battery bank should be compatible with the selected charging profile.

Installation and System Considerations

The charger accepts 90V to 265V AC input and provides up to 60 amps at 24V DC across three isolated banks. It has IP23 protection, ignition protection, MasterBus compatibility, an included temperature sensor, full DC/AC electronic protection, and a variable-speed internal fan. The unit measures 14.3 in. by 9.1 in. by 5.1 in. and weighs 15.4 lbs. Installation should follow the charger manual and the electrical requirements applicable to the vessel.

Warranty and Support

Warranty information is not included in the listed product data. Review the manufacturer documentation for product details, setup, and warranty coverage.

Before Ordering the Mastervolt ChargeMaster 24/60-3 Charger

Before ordering, confirm that your battery system is 24V DC, has up to three separate battery banks, and uses AGM, gel, flooded, or manually selectable Li-ion batteries. Confirm that your available AC source falls within the listed 90V to 265V range. Review the 60-amp output, 28.5V absorption, 26.5V float, IP23 rating, ignition protection, dimensions, and available installation space before purchase.