Promariner ProNautic 1240P Marine Battery Charger

Description

Supporting three isolated distributed-on-demand banks, theProMariner ProNautic 1240P Marine Battery Chargersupplies up to 40 amps of continuous 12V DC output. Its auto-ranging 100V to 240V AC input works at 50/60 Hz, while the listed battery chemistry support includes LiFePO4, AGM, gel, flooded, and sealed lead-acid batteries.

This 5-stage digital performance charger lists programmable 14.4V absorption and 13.4V float values. Active power factor correction supports over 90 percent efficiency, and the remote temperature probe is supported. IP21 dry-mount classification, SAE J1171 and ISO 8846 ignition-protection standards, and a variable-speed cooling fan are listed.

Key Specifications of the ProMariner ProNautic 1240P Marine Battery Charger

• The charger provides 40 amps of continuous output.
• Three isolated banks use distributed-on-demand charging.
• The nominal charging output is 12V DC.
• Auto-ranging input accepts 100V to 240V AC.
• The input range supports 50 Hz and 60 Hz.
• Listed profiles support LiFePO4 and lead-acid chemistries.
• Five charging stages provide digital performance charging.
• Absorption and float values are 14.4V and 13.4V.
• A remote temperature probe is supported.
• Active power factor correction supports over 90 percent efficiency.
• IP21 identifies this charger for dry mounting.
• The charger weighs 5.0 lbs.

Battery and Charging Compatibility

The ProNautic 1240P supports listed LiFePO4, AGM, gel, flooded, and sealed lead-acid battery chemistries. Three isolated banks use distributed-on-demand charging for 12V DC systems, with a stated recommendation for 80Ah to 400Ah marine battery systems.

This three bank battery charger uses listed programmable 14.4V absorption and 13.4V float values. Confirm the selected charge profile and battery-bank characteristics with the applicable battery documentation.

Installation and System Considerations

The charger uses a 100V to 240V AC auto-ranging input at 50/60 Hz and produces 12V DC output. It has IP21 dry-mount classification, SAE J1171 and ISO 8846 ignition-protection standards, variable-speed fan cooling, and short-circuit, reverse-polarity, and over-temperature protection. Its dimensions are 12.25 in. by 8.5 in. by 3.5 in. Installation should follow the charger manual and the electrical requirements applicable to the vessel.

Warranty and Support

The ProMariner ProNautic 1240P Marine Battery Charger includes a 5 Years Limited Manufacturer Warranty. Review the manufacturer documentation for product details, setup, and warranty coverage.

Before Ordering the ProMariner ProNautic 1240P Marine Battery Charger

Before ordering, confirm that your battery system is 12V DC and requires up to 40 amps across three isolated outputs. Review the listed chemistry profiles, 80Ah to 400Ah system recommendation, input range, dry-mount classification, installation dimensions, and warranty. You should confirm compatibility with your battery manufacturer and vessel electrical system before purchase.