FREE DELIVERY TODAY - Place your 1st order.
Reverso FPS 80 Fuel Polishing System – 12V – 80 GPH – Mechanical Controller
Treating stored fuel on small diesel cruisers, the Reverso FPS 80 12V Mech circulates 80 GPH through a Racor 500 filter, utilizing a 12V vane pump and mechanical switch on 3/8″ flare lines.
- 80 GPH output cleans boat diesel.
- 12V motor draws 5-8A efficiency.
- Racor 500 filter traps fine particles.
- T-handle top eases fast element changes.
- Marine-grade aluminum base prevents corrosion.
Products are almost sold out
available only:
7In Stock
Description
Run manual 12V fuel polishing with the Reverso FPS 80 Fuel Polishing System – 12V – 80 GPH – Mechanical Controller. This compact manual-control 12V marine fuel polishing system is specified for small inboard diesel cruisers, sailboat tanks, and fuel transport rigs, with an 80 GPH (303 LPH/1.33 GPM) processing rate.
The FPS-080-12V-M operates on 12V DC power with an approximate 5A to 8A current draw. It uses a Racor 500 Turbine Series compatible element, a mechanical toggle switch for manual cycle control, 3/8-inch male flare inlet and outlet ports, and a corrosion-resistant marine-grade aluminum chassis.
Key Features of Reverso FPS 80
- Compact manual-control 12V marine fuel polishing system supports the listed diesel fuel-service applications.
- 80 GPH (303 LPH/1.33 GPM) processing rate identifies the listed fuel-circulation capacity.
- 12V DC electric operation matches the listed marine electrical requirement.
- Approximate 5A to 8A current draw defines the listed electrical demand.
- Racor 500 Turbine Series compatible element identifies the listed filtration-element compatibility.
- Mechanical toggle switch provides manual cycle control.
- 3/8-inch male flare inlet and outlet ports identify the specified plumbing connection type.
- Corrosion-resistant marine-grade aluminum chassis provides the listed baseplate construction.
- Top-access T-handle provides the listed element-replacement access point.
- CE approval and ISO 10088 marine standards compliance are listed for this system.
Fitment and Maintenance Use
The Reverso FPS-080-12V-M is specified for small inboard diesel cruisers, sailboat tanks, and fuel transport rigs. It supports manual fuel polishing where 12V DC power, a Racor 500 Turbine Series compatible element, and 3/8-inch male flare plumbing connections fit the fuel-system design. Confirm fitment using the engine model, serial number, and manufacturer service documentation before ordering.
Installation and Service Considerations
Verify that the electrical system provides 12V DC power and can support the listed approximate 5A to 8A current draw. Confirm that fuel plumbing matches the 3/8-inch male flare inlet and outlet ports and that the mounting space accommodates the 15.0 x 11.0 x 7.0 inch chassis. Use the mechanical toggle switch and top-access T-handle according to the product instructions. Follow the engine manufacturer’s service manual and the product instructions for installation and service procedures. Verify the engine model and serial number before service.
Before Ordering the Reverso FPS 80
Confirm that Reverso Pumps part number FPS-080-12V-M is appropriate for your small inboard diesel cruiser, sailboat tank, or fuel transport rig. Verify the 12V DC requirement, approximate 5A to 8A current draw, 80 GPH (303 LPH/1.33 GPM) processing rate, Racor 500 Turbine Series compatible element, manual toggle-switch control, 3/8-inch male flare ports, aluminum chassis, top-access T-handle, CE and ISO 10088 compliance, and 15.0 x 11.0 x 7.0 inch installation size. Confirm compatibility with your engine manufacturer’s documentation before purchase.
Reverso FPS 80 Fuel Polishing System - 12V - Mechanical Controller
| Brand | Reverso Pumps |
|---|---|
| Manufacturer Part Number (MPN) | FPS-080-12V-M |
| Country of Origin | USA |
| System Classification | Compact Manual-Control 12V Marine Fuel Polishing System |
| Flow Rate Performance | 80 GPH (303 LPH / 1.33 GPM) |
| Operating Voltage & Draw | 12V DC Electric (~5A to 8A Current Draw) |
| Primary Filtration Core | Racor 500 Turbine Series Compatible Element |
| Controller Architecture | Mechanical Toggle Switch (Manual Cycle Control) |
| Plumbing Connections | 3/8" Male Flare In/Out Ports |
| Baseplate Construction | Corrosion-Resistant Marine-Grade Aluminum Chassis |
| Maintenance Feature | Top-Access T-Handle for Fast Element Replacement |
| Compliance Certifications | CE Approved / ISO 10088 Marine Standards Compliant |
| Dimensions & Dry Weight | 381 x 279 x 178 mm (15.0" x 11.0" x 7.0") / 9.0 kg (20.0 lbs) |
| Service Target Application | Small Inboard Diesel Cruisers, Sailboat Tanks & Fuel Transport Rigs |
| Standard Warranty | 1 Year Limited Manufacturer Warranty |
You must be logged in to post a review.
Reviews
There are no reviews yet.