FREE DELIVERY TODAY - Place your 1st order.
MARCH PUMPS AC-3CP-MD (600 GPH) 115V Mag-Drive Centrifugal Pump
Circulating cooling seawater through yachts, the MARCH PUMPS AC-3CP-MD generates 600 GPH at 8.2 PSI, utilizing an air-cooled 0.04 HP motor on 115V circuits to feed 24,000 BTU systems.
- 600 GPH flow cools 24,000 BTU.
- 115V motor draws 1.8A efficiency.
- Air-cooled design fits ventilated engine rooms.
- Polypropylene housing stops marine saltwater rust.
- 19-foot head provides steady discharge lift.
Products are almost sold out
available only:
6In Stock
Description
Circulate seawater for small-yacht marine air-conditioning systems up to 24,000 BTU or compatible liquid-cooling systems with the March Pumps AC-3CP-MD 115V Magnetic Drive Centrifugal Pump. This seal-less, air-cooled open-motor pump provides a maximum rated flow of 600 GPH (10 GPM / 37.8 LPM), a maximum head of 19 ft (5.8 m), and maximum pressure of 8.2 PSI.
March Pumps model AC-3CP-MD 0130-0004-0100 uses a glass-filled polypropylene housing, ceramic magnet, and Buna-N O-ring. Its 0.04 HP (0.03 kW) open-drip-proof motor operates on 115V AC, 50/60 Hz single-phase power and draws 1.8A at 115V. The pump has a 3/4-inch FPT inlet and 1/2-inch MPT outlet.
Key Features
- Seal-less magnetic-drive centrifugal pump with an air-cooled open motor.
- Specified for small-yacht marine A/C systems up to 24,000 BTU and compatible liquid-cooling systems.
- Maximum rated flow of 600 GPH, 10 GPM, or 37.8 LPM.
- Maximum rated head of 19 ft (5.8 m) and maximum pressure of 8.2 PSI.
- 115V AC, 50/60 Hz single-phase operation.
- 0.04 HP (0.03 kW) open-drip-proof motor.
- Listed current draw of 1.8A at 115V.
- Glass-filled polypropylene housing with ceramic magnet and Buna-N O-ring.
- 3/4-inch FPT inlet and 1/2-inch MPT outlet.
- Maximum liquid-temperature rating of 190 degrees F (87 degrees C).
Compatibility and Installation
The March Pumps AC-3CP-MD is specified for compatible marine A/C seawater circulation and liquid-cooling systems. Confirm 115V AC 50/60 Hz single-phase power, correct circuit protection, 3/4-inch FPT inlet plumbing, 1/2-inch MPT discharge plumbing, expected operating flow, and system head before ordering. The open-drip-proof motor requires a dry, protected, and suitably ventilated installation location.
This pump is not specified as self-priming, so configure the system for flooded suction unless manufacturer documentation states otherwise. Actual flow varies with head, hose or pipe length, plumbing diameter, fittings, strainer condition, discharge restrictions, liquid temperature, and supply voltage. Follow manufacturer instructions and qualified marine electrical and plumbing practices for mounting, wiring, bonding, intake plumbing, and commissioning.
Before Ordering
Verify March Pumps model AC-3CP-MD 0130-0004-0100, seal-less air-cooled magnetic-drive centrifugal configuration, 600 GPH maximum flow, 19 ft maximum head, 8.2 PSI maximum pressure, 115V AC 50/60 Hz single-phase power, 0.04 HP ODP motor, 1.8A current draw, polypropylene housing, ceramic magnet, Buna-N O-ring, 3/4-inch FPT inlet, 1/2-inch MPT outlet, 190 degrees F maximum liquid temperature, 220 x 120 x 140 mm dimensions, 8.5 lb dry weight, and 1-year limited manufacturer warranty before purchase.
MARCH PUMPS AC-3CP-MD (600 GPH) 115V Mag-Drive Centrifugal Pump
| Brand | March Pumps |
|---|---|
| Model / SKU | AC-3CP-MD (0130-0004-0100) |
| Country of Origin | USA |
| Pump Category | Air-Cooled Open Motor Magnetic Drive (Seal-less) |
| Primary Application | Small Yacht Marine A/C Systems (Up to 24,000 BTU), Liquid Cooling |
| Housing & Impeller Material | Glass Filled Polypropylene with Ceramic Magnet & Buna-N O-Ring |
| Inlet / Outlet Port Size | 3/4" FPT Inlet / 1/2" MPT Outlet |
| Max Flow Rate | 600 GPH (10.0 GPM / 37.8 LPM) |
| Max Head / Pressure | 19.0 ft (5.8 m) / 8.2 PSI |
| Voltage / Frequency | 115V AC / 50/60Hz Single-Phase |
| Motor Power & Type | 0.04 HP (0.03 kW) Open Drip Proof (ODP) Motor |
| Current Draw / Amperage | 1.8A @ 115V |
| Max Liquid Temperature | 87°C (190°F) |
| Dimensions & Dry Weight | 220 x 120 x 140 mm / 3.8 kg (8.5 lbs) |
| Standard Warranty | 1 Year Limited Manufacturer Warranty |
You must be logged in to post a review.
Reviews
There are no reviews yet.