OBERDORFER 104MP-F57 Centrifugal Pump

Description

Circulate water for small-vessel air-conditioning, laboratory photoprocessing, or compatible mild-chemical systems with the Oberdorfer 104MP-F57 Magnetic Drive Centrifugal Pump. This compact seal-less magnetic-drive centrifugal pump provides a maximum rated flow of 600 GPH (10 GPM / 37.8 LPM), maximum head of 12 ft (3.7 m), and maximum pressure of 5.2 PSI.

Oberdorfer model 104MP-F57 uses a glass-filled polypropylene housing, ceramic magnet, precision ceramic shaft, and 316 stainless-steel hardware. Its 1/30 HP (0.03 kW) continuous-duty motor operates on 115V AC, 60 Hz single-phase power. The pump has 1/2-inch NPT suction and 1/2-inch NPT discharge connections.

Key Features

• Compact seal-less magnetic-drive centrifugal pump.
• Specified for small-vessel A/C, laboratory photoprocessing, and compatible mild-chemical circulation.
• Maximum rated flow of 600 GPH, 10 GPM, or 37.8 LPM.
• Maximum rated head of 12 ft (3.7 m) and maximum pressure of 5.2 PSI.
• 1/30 HP (0.03 kW) continuous-duty motor.
• 115V AC, 60 Hz single-phase power.
• Glass-filled polypropylene housing.
• Ceramic magnet and precision ceramic shaft.
• 316 stainless-steel hardware.
• 1/2-inch NPT suction and 1/2-inch NPT discharge ports.

Compatibility and Installation

The Oberdorfer 104MP-F57 is specified for compatible small-vessel A/C, photoprocessing, and mild-chemical circulation systems. Confirm that the pumped liquid is compatible with polypropylene, ceramic, and 316 stainless-steel components before use. Verify 115V AC 60 Hz single-phase power, circuit protection, 1/2-inch NPT plumbing, required flow, operating head, liquid temperature, and installation location before ordering.

the listed data does not state self-priming capability; use flooded suction unless the manufacturer approves another installation arrangement. The 600 GPH maximum rating varies with total dynamic head, liquid viscosity, plumbing diameter and length, fittings, temperature, restrictions, and supply voltage. Follow manufacturer instructions and qualified electrical and plumbing practices for mounting, wiring, bonding, fluid handling, and commissioning.

Before Ordering

Verify Oberdorfer model 104MP-F57, compact seal-less magnetic-drive centrifugal configuration, compatible fluid use, 1/30 HP continuous-duty motor, 115V AC 60 Hz single-phase power, 600 GPH maximum flow, 12 ft maximum head, 5.2 PSI maximum pressure, polypropylene housing, ceramic magnet and shaft, 316 stainless-steel hardware, 1/2-inch NPT suction and discharge ports, 175 x 105 x 115 mm dimensions, 5 lb dry weight, and 1-year limited manufacturer warranty before purchase.