Primetime Self-Priming Marine Centrifugal Pump – 115V 60Hz, 316 Stainless Steel

Description

Move water for emergency bilge evacuation, high-pressure firefighting, or deck washdown with the Primetime PT-SS-60HZ Self-Priming Marine Centrifugal Pump. This heavy-duty self-priming pump provides a maximum rated flow of 4,800 GPH (80 GPM / 18.1 m³/h), maximum head of 69 ft (21.0 m), maximum pressure of 30.0 PSI, and static suction lift up to 20 ft (6.0 m) using its internal priming chamber.

Primetime model PT-SS-60HZ uses a cast 316 stainless-steel casing, semi-open 316 stainless-steel impeller, 316 stainless-steel shaft, and Viton mechanical face seal. Its 1 HP (0.75 kW) Class F motor operates on 115V AC, single-phase, 60 Hz power. The pump has 1-1/2-inch NPT female inlet and outlet ports, passes spherical solids up to 6 mm, and has a maximum liquid-temperature rating of 185 degrees F (85 degrees C).

Key Features

• Heavy-duty self-priming marine centrifugal pump for bilge evacuation, high-pressure firefighting, and deck washdown.
• Maximum rated flow of 4,800 GPH, 80 GPM, or 18.1 m³/h.
• Maximum rated head of 69 ft (21.0 m) and maximum pressure of 30.0 PSI.
• Self-priming capability up to 20 ft (6.0 m) static suction lift with internal chamber.
• 1 HP (0.75 kW) Class F motor.
• 115V AC, single-phase, 60 Hz power requirement.
• Cast 316 stainless-steel casing and semi-open 316 stainless-steel impeller.
• 316 stainless-steel shaft and Viton mechanical face seal.
• 1-1/2-inch NPT female inlet and outlet ports.
• Passes stated spherical solids up to 6 mm.

Compatibility and Installation

The Primetime PT-SS-60HZ is specified for compatible 115V AC, 60 Hz marine bilge, firefighting, and deck-washdown systems. Confirm electrical supply, circuit protection, 1-1/2-inch NPT plumbing, required operating flow, system head, suction-lift conditions, fluid compatibility, and secure mounting space before ordering. Maximum flow, head, pressure, solids handling, and suction lift are ratings that depend on correct priming, suction plumbing, total dynamic head, fittings, intake conditions, discharge restrictions, and supply voltage.

Use appropriate marine intake, seacock, strainer, plumbing, mounting, wiring, and bonding components, and follow manufacturer instructions for initial priming and system commissioning. The 6 mm solids-handling rating does not eliminate the need for intake screening or strainer maintenance. This pump does not independently meet fire-protection or emergency-dewatering requirements; verify the complete vessel system against applicable regulations and safety requirements.

Before Ordering

Verify Primetime model PT-SS-60HZ, heavy-duty self-priming centrifugal configuration, 4,800 GPH maximum flow, 69 ft maximum head, 30.0 PSI maximum pressure, up-to-20-ft static suction lift, 1 HP Class F motor, 115V AC single-phase 60 Hz power, cast 316 stainless-steel casing, semi-open 316 stainless-steel impeller, 316 stainless-steel shaft, Viton mechanical seal, 1-1/2-inch NPT female ports, stated 6 mm solids handling, 185 degrees F maximum liquid temperature, 420 x 210 x 250 mm dimensions, 41 lb dry weight, and 1-year limited manufacturer warranty before purchase.