SCOT PUMP – 48376 – Viking 2″ Strainer – 50/60HZ – 2HP – Marine Self-Priming Centrifugal Pumps

Description

Provide high-capacity water movement with debris protection using the SCOT Pump 48376 Viking Marine Self-Priming Centrifugal Pump with Integrated 2-Inch Strainer. This self-priming centrifugal pump is specified for commercial-vessel fire response, high-flow saltwater ballast, and emergency bilge-clearing applications. It uses a 2 HP (1.5 kW) high-performance motor operating on 230V AC, 50/60 Hz single-phase power.

SCOT Pump model 48376 combines all-bronze wetted construction, a stainless-steel drive shaft, and an integrated 2-inch NPT heavy-duty cast-bronze raw-water basket strainer. Its high-lift self-priming design supports below-deck installation, and the assembly has a listed dry weight of 78 lb (35.4 kg).

Key Features

• Self-priming marine centrifugal pump with integrated raw-water basket strainer.
• Specified for commercial-vessel fire response, high-flow saltwater ballast, and emergency bilge clearing.
• 2 HP (1.5 kW) high-performance motor.
• 230V AC, 50/60 Hz single-phase electrical requirement.
• Integrated 2-inch NPT heavy-duty cast-bronze raw-water basket strainer.
• All-bronze wetted construction.
• Stainless-steel drive shaft.
• High-lift self-priming action for below-deck installation.
• Integrated strainer helps protect the pump from intake debris.
• Dry weight of 78 lb (35.4 kg).

Compatibility and Installation

The SCOT Pump 48376 Viking with integrated strainer is specified for compatible commercial-vessel and high-flow saltwater applications. Confirm 230V AC 50/60 Hz single-phase power, required circuit protection, 2-inch NPT strainer-plumbing compatibility, pump location, mounting support, and complete system flow and pressure requirements before ordering. the listed specifications do not state a specific flow, head, or pressure rating; final performance depends on the vessel plumbing and total dynamic head.

Install the unit according to manufacturer instructions, with access for strainer inspection and basket cleaning. Use appropriate seacocks, below-waterline fittings, plumbing, bonding, and electrical-protection components as required by the vessel system. A self-priming pump still requires correct initial priming and properly designed inlet plumbing. This product does not independently establish compliance with any firefighting or emergency-dewatering requirement.

Before Ordering

Verify SCOT Pump model 48376 Viking integrated-strainer configuration, self-priming centrifugal design, 2 HP motor, 230V AC 50/60 Hz single-phase power, integrated 2-inch NPT cast-bronze raw-water basket strainer, all-bronze wetted construction, stainless-steel drive shaft, below-deck high-lift self-priming application, 78 lb dry weight, intended ballast, bilge, or fire-response application, and 1-year limited manufacturer warranty before purchase.