FREE DELIVERY TODAY - Place your 1st order.
Furuno HRP11-12 Autopilot Pump
Furuno HRP11-12 The Furuno HRP11-12 pump supplies 1.1L per Minute through 7.3 cu in – 12.2 cu in steering systems, using 12V DC and 50 Bar pressure
- 1.1L per Minute moves steering fluid
- 50 Bar supports hydraulic ram pressure
- 7.3 cu in – 12.2 cu in fits rams
- 12V DC powers autopilot operation
- 15 Amps Maximum Load limits demand
Products are almost sold out
available only:
6In Stock
Description
The Furuno HRP11-12 Autopilot Pump delivers 1.1 liters per minute for steering cylinders from 7.3 to 12.2 cubic inches. Its 12V permanent-magnet reversing motor supports NavPilot 300, 700, and 711C systems, with a listed 50-bar pressure and 15-amp maximum load. Vertical or horizontal foot mounting and 1/4-inch NPT fittings define the installation configuration.
The pump draws approximately 4 to 7 amps during typical operation and includes mounting bolts and sealing plugs. Verify cylinder volume, controller compatibility, hydraulic lines, current demand, and IP55 protection before installation.
Key Specifications of the Furuno HRP11-12 Autopilot Pump
- Reversible gear pump supports hydraulic autopilot systems.
- Flow rate is listed at 1.1 liters per minute.
- Cylinder compatibility ranges from 7.3 to 12.2 cubic inches.
- Maximum pressure is listed at 50 bar.
- 12V DC operation is specified.
- Typical operation draws 4 to 7 amps.
- Maximum current draw reaches 15 amps.
- NavPilot 300, 700, and 711C compatibility is listed.
- One-quarter-inch NPT fittings provide hydraulic connections.
- Mounting bolts and sealing plugs are included.
Pump Function, Flow, and Controls
The HRP11-12 pump provides precision reversing hydraulic flow at the listed 1.1-liter-per-minute rate. Its permanent-magnet motor supports the connected autopilot system, while self-priming height, dry-run capability, duty cycle, and thermal protection are not specified.
Plumbing, Power, and Compatibility Considerations
Verify the 7.3 to 12.2 cubic-inch cylinder range, NavPilot computer, 12V supply, 4 to 7-amp typical draw, 15-amp maximum load, NPT fittings, hydraulic lines, and power wiring before installation.
Mounting, Installation, and Environmental Conditions
Confirm the 190mm pump length, 95mm body diameter, vertical or horizontal foot mounting, hydraulic-line access, cable routing, service clearance, operating temperature, and IP55 rating before installation.
Warranty and Support
Warranty coverage is not confirmed in the available product data. Buyers should verify current coverage, exclusions, and claim procedures with the seller or manufacturer before purchase. These terms reflect currently available manufacturer information, and buyers should verify active warranty policies directly with the seller or manufacturer before purchase.
Before Ordering the Furuno HRP11-12 Autopilot Pump
Verify the 7.3 to 12.2 cubic-inch range, 1.1-liter flow, 50-bar pressure, 12V supply, current demand, NavPilot compatibility, NPT fittings, mounting position, sealing plugs, and package contents before ordering.
Furuno HRP11-12 Autopilot Pump
| Drive Type | Reversible Hydraulic Gear Pump |
|---|---|
| Pump/Ram Capacity | 1.1L per Minute Flow Rate |
| Flow Rate / Speed | Precision High-Response Output |
| Max Pressure | 50 Bar Standard Hydraulic |
| Cylinder Compatibility | 7.3 cu in - 12.2 cu in (120cc - 200cc) |
| Operating Voltage | 12V DC System |
| Peak Current Draw | 15 Amps Maximum Load |
| Average Power Draw | 4A - 7A Typical Operation |
| Motor Type | Permanent Magnet Reversing DC |
| Computer Compatibility | NavPilot 300, 700, 711C |
| Port Size / Thread | 1/4" NPT Standard Fittings |
| Drive Connection | Hydraulic High-Pressure Lines |
| Rotation/Stroke Direction | Dual-Direction Precision Flow |
| Mounting Type | Vertical or Horizontal Foot Mount |
| Housing Material | Anodized Aluminum & High-Grade Steel |
| Waterproof Rating | IP55 Marine Protected |
| Operating Temperature | -15°C to +55°C Marine Grade |
| Length (Overall) | 190 mm Compact Chassis |
| Width/Diameter | 95 mm Body Diameter |
| Weight | 3.1 kg (6.8 lbs) |
| Included Accessories | Mounting Bolts, Sealing Plugs |
| Key Mechanical Feature | Low-vibration gear design for quiet cabin |
You must be logged in to post a review.
Reviews
There are no reviews yet.