Speco 4MP HD-TVI Mini Turret Camera 2.9mm Lens – White Housing

Description

Add HD-TVI monitoring to a protected cabin, cockpit, dock, or covered onboard area with the Speco O4T2M 4MP Mini Turret Camera. Its 2.9 mm fixed lens, 2560 × 1440 video output, built-in infrared LEDs, and digital wide dynamic range give users a compact analog camera option for a compatible DVR or HD-TVI monitor. Need nighttime coverage without converting the boat to an IP network? The O4T2M uses BNC HD-TVI output and a white IP67-rated enclosure for fixed wall or ceiling installation.

Key Specifications

• Speco Technologies 4MP HD-TVI Mini Turret Camera, White, model O4T2M.
• 2560 × 1440 4MP HD-TVI analog video output.
• 2.9 mm fixed wide-angle lens.
• Built-in infrared LEDs with up to approximately 100 ft of IR viewing range under suitable conditions.
• Digital Wide Dynamic Range processing.
• HD-TVI analog video connection through BNC.
• 12V DC input with up to approximately 4W maximum power consumption.
• IP67 weatherproof enclosure and operating temperature range of -4°F to 122°F (-20°C to 50°C).
• Approximate dimensions: 3.7 × 3.1 inches; approximate weight: 0.77 lb (0.35 kg).
• Surface wall or ceiling mount configuration.

Integration

The O4T2M requires a compatible HD-TVI DVR, monitor, or video interface. It is not an Ethernet IP camera, PoE camera, marine MFD camera, chartplotter, radar, or NMEA device. Confirm that the intended recorder supports 4MP HD-TVI and that existing coaxial cable, BNC connectors, power supply, and monitor resolution are suitable.

Infrared range varies with reflectivity, weather, ambient light, lens cleanliness, mounting height, and objects within the scene. The camera can supplement observation and security but should not be relied upon as a replacement for proper lookout or vessel-navigation practices.

Installation Notes

Mount the turret camera where its fixed lens covers the intended area and test framing before drilling. Keep the lens clear of exhaust soot, direct glare, spray, rails, rigging, and objects that may reflect infrared light back into the camera. Route 12V power and BNC coaxial wiring through protected paths.

Use sealed cable entries, appropriate circuit protection, and corrosion-resistant mounting hardware. Inspect the lens, camera seal, cables, and BNC connectors regularly, especially when used in a damp or saltwater environment.

Before Ordering

Confirm HD-TVI DVR compatibility, BNC/coaxial infrastructure, 12V power availability, IR coverage requirements, camera mounting location, and whether the IP67 enclosure suits the intended exposure before ordering.