FatSac Supa Pump 3.0 – Black w/ inline switch

Description

The FatSac Supa Pump 3.0 – Black w/ inline switch is a portable 12-volt submersible ballast pump system for filling and draining compatible FatSac and Fly High Pro-X ballast bags over the side of the boat. Its 1,700 GPH motor moves water through a 12.5-foot kink-resistant reinforced hose, while the 15-foot power cord reaches accessory outlets in larger boats. An in-line rocker switch gives users direct on-and-off control during ballast filling and draining.

The pump connects through a 12-volt cigarette-lighter plug with a stainless electrical adapter designed to resist rust and corrosion. A helical wire-reinforced black hose maintains its shape during use, while custom-machined FatSac Quick Twist fittings connect with the W730 cap system. The pump is compatible with all FatSac and Fly High Pro-X Series bags. Position the submersible pump securely, monitor water transfer throughout operation, and keep all electrical connections clear of standing water.

Key Features of FatSac Supa Pump 3.0 – Black w/ inline switch

• 1,700 GPH submersible motor: The high-capacity 12-volt motor moves water for portable ballast-sac filling and draining.
• Over-the-side ballast operation: The portable system is designed to transfer water between the lake and compatible ballast sacs without permanent plumbing.
• Heavy-duty in-line rocker switch: The built-in switch provides direct on-and-off control along the power line during water transfer.
• 12.5-foot reinforced hose: The 1-inch black hose uses helical wire reinforcement to resist kinking during fill and drain operation.
• 15-foot marine power cord: The extended cable reaches 12-volt accessory outlets in longer boats and deeper hull layouts.
• 12-volt cigarette-lighter plug: The pump uses a marine accessory plug with a stainless electrical adapter for the stated power connection.
• Quick Twist fittings included: Custom-machined FatSac fittings connect with compatible W730 cap systems for ballast-bag transfer.
• FatSac and Fly High compatibility: The pump is designed for use with all FatSac and Fly High Pro-X Series bags.

For Portable Ballast Filling and Draining

The Supa Pump 3.0 is designed for boat owners who want a portable way to fill and drain compatible ballast sacs without installing a permanent ballast system. Its 1,700 GPH motor, 12.5-foot hose, and 15-foot power cord support water transfer in boats with deeper hulls or more distant accessory outlets. Connect only to compatible fittings, submerge the pump correctly, monitor the sac while filling, and confirm that the boat remains within its safe ballast and passenger limits.

Why Choose FatSac Supa Pump 3.0 – Black w/ inline switch

This pump combines a portable submersible design with a 1,700 GPH motor, reinforced hose, extended power cable, and integrated in-line switch for practical ballast management on the water. The 12.5-foot hose reaches many rear-locker, floor, and bow bag placements, while the 15-foot cord provides added flexibility around larger boats. Quick Twist fittings and compatibility with FatSac and Fly High Pro-X bags make it a useful pump option for boaters building or expanding a portable ballast setup.

Warranty and Product Care

The FatSac Supa Pump 3.0 – Black w/ inline switch includes a 1-year limited manufacturer warranty, subject to applicable terms, conditions, and exclusions. Inspect the pump housing, hose, fittings, switch, cord, plug, and electrical adapter before operation. Disconnect power before handling the pump or fittings, keep electrical connections dry, flush the pump with clean water after use, drain the hose before storage, and do not operate equipment with damaged cables, fittings, housing, or switch components.