Connelly Outlaw Slalom Ski w/ Double Tempest Bindings

Description

Riders who want both feet enclosed can use the Connelly Outlaw Slalom Ski w/ Double Tempest Bindings for wide-track carving, controlled inverts, and stronger ankle support through slalom movement. The package combines the Outlaw ski, two Tempest high-cut boots, an aluminum drop-through fin, and stainless steel metric fasteners. The ski uses a high-density closed-cell polyurethane resin core, recreational glass flex sequence, C.A.P.T. variable thickness profile, hand-tuned Acrylam base, standard tunnel, wide forebody, shovel tip, and soft round bevels. ([connellyskis.com](https://www.connellyskis.com/products/outlaw-w-double-tempest-boots?utm_source=openai))

The wide forebody and shovel tip generate lift at slower boat speeds, while the standard tunnel leaves flat surfaces between the edge and tunnel for the listed stability. Soft round bevels support catch-free transitions, and the aluminum fin provides directional control beneath the ski. Suggested boat speed ranges from 26 to 32 MPH or 42 to 51 km/h. Available lengths include 65 inches for riders below 180 lbs, 67 inches for riders from 180 to 210 lbs, and 69 inches for riders at or above 210 lbs. Both Tempest boots use a low-profile aluminum chassis, high-cut upper wrap, dual-zone lacing, and independent cushioned liners with molded toe stretch panels.

Key Features of Connelly Outlaw Slalom Ski w/ Double Tempest Bindings

• High-density resin core supports the Outlaw ski structure
• Wide forebody creates lift during slower boat starts
• Shovel tip adds front surface area beneath the rider
• Standard tunnel provides the listed rock-solid stability
• Soft round bevels support smooth edge transitions
• Aluminum drop-through fin provides directional ski control
• Double Tempest boots provide matching high-cut ankle support
• Dual-zone lacing adjusts upper and lower foot fit

Wide-Track Slalom and Invert Progression

This package suits intermediate to advanced riders who prefer full high-cut boots on both feet. The Outlaw hull keeps the ski’s wide-track character, giving the rider added surface area during starts and lower-speed carving. The Tempest boots create a matched front and rear enclosure, while the high-cut upper wraps support the ankle area during stronger lateral movement. The 26 to 32 MPH range offers a setup reference, but actual boat speed should follow rider ability, water conditions, and the intended session.

Why Choose Connelly Outlaw Slalom Ski w/ Double Tempest Bindings

Choose this package when consistent front and rear boot support matters more than an open rear toe plate. The three ski lengths correspond to clear rider-weight ranges, while Tempest sizing covers Small, Medium, Large, and Extra Large options for US Men 4 through 14. The ski, two boots, fin, and metric fasteners arrive together, reducing separate equipment selection. Connelly also backs the Outlaw with its Performance Guarantee in addition to the listed 1 Year Limited Manufacturer Warranty.

Warranty & Maintenance

Connelly Outlaw Slalom Ski w/ Double Tempest Bindings includes a 1 Year Limited Manufacturer Warranty and is backed by the Connelly Performance Guarantee. Confirm current warranty terms, selected ski length, front and rear boot sizes, fin hardware, and included fasteners before purchase. Inspect both high-cut boots, lace locks, liners, molded toe panels, aluminum chassis plates, fin screws, metric inserts, ski base, and edges before use. Store the bindings dry and protect the ski during transport. Follow current manufacturer care instructions.