Garmin GMR Fantom 5X Radar Power Pedestal Only

Scanning coastal fairways across 72 nautical miles, this Garmin Fantom 5X radar pedestal rotates open arrays up to 48 RPM, delivering 50W solid-state pulse compression with MARPA tracking inside an IPX6 housing at 34.8 lbs.

50W solid-state transceiver equals 6kW magnetrons
48 RPM speed updates fast-moving targets
MARPA tracking monitors ten collision threats
Universal pedestal fits 4ft or 6ft arrays

$3,467.00

Products are almost sold out

This product is about to run out

available only:

In Stock

Wholesale Price

Request for Quotation

Add to wishlist

Compare

SKU: GRM-FAN5X-PED Category: Marine Radars Brand: Garmin

SKU:

GRM-FAN5X-PED

Description

Replace the radar drive section of a compatible Garmin open-array installation with the GMR Fantom 5X Pedestal Only. This 50W solid-state pedestal gives owners a direct path to reuse a matched 4-foot or 6-foot Fantom array rather than replacing an entire radar assembly. Need a practical radar pedestal for a cruiser, sportfisher, or retrofit project? The 5X combines pulse compression, MotionScope Doppler, and 24/48 RPM operation for use with compatible Garmin displays and marine network equipment.

Key Specifications

Garmin GMR Fantom 5X Pedestal Only, part number 010-02585-10.
50W solid-state pulse-compression radar pedestal with MotionScope Doppler capability.
Requires a separately purchased compatible Garmin Fantom 4-foot or 6-foot open-array antenna.
Maximum instrumented range up to 72 nautical miles in a complete compatible radar configuration.
Supports 24 RPM and 48 RPM rotation modes.
Supports true echo trails and MARPA tracking for up to 10 targets when compatible displays, heading, and position data are available.
Uses Garmin Marine Network Ethernet and operates from 10V to 32V DC.
Listed power use is 65W active and 10W standby; pedestal-only weight is 34.8 lb (15.8 kg) with IPX6 protection.

Compatibility

This is a pedestal-only component. It requires a compatible Fantom 4-foot or 6-foot antenna array, a Garmin chartplotter or MFD that supports the radar, power wiring, circuit protection, Garmin Marine Network or compatible BlueNet connections, and an appropriate mounting location.

MotionScope Doppler can help call attention to moving targets on a compatible radar display. MARPA and radar overlay need appropriate heading and GPS data, and the published 72-nautical-mile instrumented range should not be interpreted as guaranteed detection distance. Actual performance changes with scanner elevation, target size, weather, sea clutter, rainfall, radar settings, and installation conditions.

Installation Notes

Use a rigid, level mounting platform sized for the pedestal and the selected array. Provide full swing clearance for the array, follow all Garmin personnel and compass-safe-distance guidance, and minimize radar shadowing from masts, antennas, hardtops, rigging, lights, or exhaust structures.

Protect power and network cable runs from water, heat, abrasion, vibration, and high-current interference. Install correct overcurrent protection and use marine-grade electrical components. Complete bearing alignment and system setup after installation through the compatible Garmin display.

Before Ordering

Confirm the selected Fantom array, Garmin MFD compatibility, network type, power-system capacity, cable lengths, mounting strength, rotation clearance, and GPS/heading sensor requirements before ordering.

Brand	Garmin
Full Model SKU/Code	010-02585-10 (GMR Fantom 5X Pedestal Only)
Country of Origin	Taiwan
Radar Type	Solid-State Pulse Compression with MotionScope Doppler Technology
Antenna Form Factor	Open Array Power Pedestal (Requires 4-Foot or 6-Foot Fantom Antenna Arrays)
Peak Power Output	50 Watts Solid-State Output Equivalent
Maximum Radar Range	72 Nautical Miles (NM)
Beamwidth Vertical	22° Expansion Beam Profile Layout
Rotation Speed	24 RPM / 48 RPM Dual Dynamic Multi-Speed Automation Rotation
Target Tracking Capacity	True Echo Trails, MARPA Target Tracking (Up to 10 Targets Simultaneously)
Data Networking Protocols	Garmin Marine Network High-Speed Ethernet Integration Line
Operating Voltage	10 to 32 Volts DC Universal Input Rail Standard
Power Consumption	Active Transmitting: 65 Watts (Base Drive Unit) / Standby Mode: 10 Watts
Waterproof Rating	IPX6 Front Facing Dashboard Panel Sealing Armor
Wind Load Resistance	Up to 80 Knots (Continuous Structural Speed Capacity)
Dry Weight	15.8 kg / 34.8 lbs (Pedestal Drive Base Mechanism Weight Only)
Application	Custom commercial retrofits, replacement structural arrays, or standalone power pedestal swaps for mid-to-large offshore cruisers and sportfishers (28-60 ft boat lengths)