Simrad NSS9 evo3S – Radar Bundle C-MAP Enhanced & HALO20+

Description

Bring charting, sonar, radar, and Doppler target awareness together at one helm with the Simrad NSS9 evo3S and HALO20+ Radar Bundle. The package pairs a 9-inch touchscreen MFD with C-MAP Enhanced charts and a 20-inch solid-state radome, providing a practical navigation setup for coastal cruising, fishing, and night operation. Want a compact system that can watch close-in traffic and distant returns at the same time? The HALO20+ adds VelocityTrack Doppler, independent dual-range capability, and up to 60 RPM scanning to the NSS9 evo3S display platform.

Key Specifications

• Simrad NSS9 evo3S MFD and HALO20+ radar bundle with C-MAP Enhanced charts.
• 9-inch Simrad NSS evo3S display with built-in GPS, sonar capability, Wi-Fi, and radar support.
• 20-inch HALO20+ solid-state pulse-compression radar radome.
• 25W radar transmitter output with up to 36 NM instrumented range.
• 4.9° horizontal beamwidth and 25° vertical beamwidth.
• Up to 60 RPM rotation with InstantOn operation.
• VelocityTrack Doppler target coloring and independent dual-range radar viewing.
• Supports MARPA tracking for up to 10 targets with compatible heading and position data.
• NMEA 2000, Ethernet, and Wi-Fi connectivity.
• 12V/24V DC operation; radar draws approximately 20W while the MFD draw depends on backlight, sonar, and network use.
• IPX6 radar protection, IPX7 MFD protection, and 100-knot wind rating for the radar dome.

Integration

The bundle includes a compatible display and radar scanner, but it may still require installation cables, a network backbone, transducer selection for sonar, and heading/AIS sensors depending on the desired functions. Ethernet carries radar video, while NMEA 2000 distributes compatible position, heading, AIS, autopilot, and sensor data.

Simrad confirms that this bundle includes the NSS9 evo3S 9-inch display, preloaded C-MAP charts, and HALO20+ pulse-compression radar. [917] VelocityTrack and MARPA help supplement situational awareness but do not replace visual lookout, safe speed, charts, or compliance with navigation rules.

Installation Notes

Mount the 20-inch radome on a rigid, level platform with clear rotation and minimal obstruction from antennas, rigging, masts, lights, and exhaust. Install the NSS9 evo3S at a protected helm position with suitable viewing angle, drainage, cable clearance, and access to controls.

Route power, Ethernet, NMEA 2000, and sonar cabling away from heat, chafe, bilge water, moving equipment, and high-current wiring. Follow Simrad instructions for circuit protection, safe distances, chart updates, radar alignment, and network setup. Professional installation is recommended.

Before Ordering

Confirm chart coverage, MFD mounting space, radar-mount strength, 20-inch dome clearance, power capacity, required NMEA 2000 network components, Ethernet routing, transducer needs, and heading/GPS/AIS sensor requirements before ordering.