Simrad NSX 3009 – Radar Bundle HALO20+ & Active Imaging 3-in-1

Description

Combine a modern Simrad touchscreen, active sonar, and Doppler radar in one compact navigation package with the NSX 3009 HALO20+ and Active Imaging 3-in-1 Bundle. The 9-inch NSX display works with a 20-inch HALO20+ radome and Active Imaging transducer, giving anglers and coastal boaters a connected setup for charting, sonar, radar, and vessel-data viewing. Need a manageable helm footprint with independent radar ranges? The HALO20+ adds VelocityTrack target coloring, 36 NM instrumented range, and up to 60 RPM scanning to the NSX platform.

Key Specifications

• Simrad NSX 3009 radar bundle with HALO20+ radar and Active Imaging 3-in-1 transducer.
• 9-inch Simrad NSX multifunction display with chartplotting, sonar, radar, Wi-Fi, and network support.
• 20-inch HALO20+ solid-state pulse-compression Doppler radar radome.
• 25W radar output with up to 36 NM instrumented range.
• 4.9° horizontal beamwidth and 25° vertical beamwidth.
• Up to 60 RPM rotation with VelocityTrack Doppler target coloring.
• Supports independent dual-range radar operation and MARPA tracking for up to 10 targets with compatible navigation inputs.
• Includes Active Imaging 3-in-1 transducer for CHIRP, SideScan, and DownScan imaging.
• Ethernet, NMEA 2000 Micro-C, and Wi-Fi connectivity.
• 12V DC input with listed operating draw of approximately 20W for radar and 11.5W for the MFD.
• IPX6 radar protection, IPX7 MFD protection, and a 100-knot wind rating for the radar dome.

Integration

The bundle provides the display, radar, and transducer, but installations may still need maps, a heading sensor, AIS source, NMEA 2000 backbone, Ethernet cabling, mounting hardware, and circuit protection. Radar video travels through Ethernet, while NMEA 2000 can distribute compatible position, heading, AIS, autopilot, and sensor data.

VelocityTrack can help make moving targets easier to identify, while MARPA and radar overlay need compatible GPS and heading inputs. Sonar performance depends on transducer installation, hull design, water depth, boat speed, turbulence, electrical interference, and local water conditions.

Installation Notes

Install the HALO20+ radome on a rigid, level mount with clear rotation and minimal obstructions. Position the NSX 3009 where it remains visible and accessible from the helm. Mount the Active Imaging transducer according to Simrad guidance, away from propeller wash, strakes, steps, hull turbulence, and other sonar sources of interference.

Use protected power, Ethernet, NMEA 2000, and transducer cable routes. Follow Simrad instructions for circuit protection, radar alignment, sonar placement, safe distances, and software setup. Professional installation is recommended for integrated radar-and-sonar systems.

Before Ordering

Confirm the NSX 3009 fits the helm, verify chart coverage, radar mount strength, dome clearance, transducer mounting suitability, 12V power capacity, network components, and heading/GPS/AIS sensor requirements before ordering.