FREE DELIVERY TODAY - Place your 1st order.
Furuno DRS25ANXT/4 – Solid State Doppler Radar 4-Foot Open Array
Penetrating offshore squalls across 96 nautical miles, the Furuno DRS25ANXT/4 Doppler radar delivers 200W solid-state pulse compression through a 4-foot open array, tracking 100 targets via Target Analyzer and RezBoost at 48.5 lbs.
- 200W solid-state output equals 25kW magnetrons
- RezBoost sharpens 1.9-degree horizontal beam resolution
- Target Analyzer Doppler identifies hazardous targets
- Bird Mode pinpoints distant feeding flocks
Products are almost sold out
available only:
6In Stock
Description
Bring high-power Doppler radar performance to a compatible Furuno navigation system with the DRS25A-NXT/4 and its 4-foot open array. The 200W solid-state pulse-compression scanner, 1.9° beamwidth, and up to 96 NM instrumented range give offshore operators detailed radar coverage for tracking traffic, weather, shoreline features, and bird activity. Need advanced target information without magnetron warm-up time? The DRS25A-NXT/4 supports Target Analyzer Doppler, RezBoost beam sharpening, Fast Target Tracking, Bird Mode, and dual-range operation through compatible NavNet displays.
Key Specifications
- Furuno DRS25A-NXT/4 solid-state Doppler radar with 4-foot open array.
- 200W solid-state pulse-compression radar output.
- 4-foot open-array antenna with 1.9° horizontal and 22° vertical beamwidth.
- Up to 96 NM instrumented range and approximately 10 m minimum range.
- RezBoost processing is available through compatible Furuno displays.
- 24, 36, and 48 RPM rotation modes.
- Supports Target Analyzer Doppler, Bird Mode, Fast Target Tracking for up to 100 targets, and dual-range operation.
- Furuno Ethernet networking for compatible NavNet TZtouch systems.
- 12V/24V DC input, approximately 80W operating draw, 20W standby draw, IP56 protection, and 70-knot wind rating.
- Approximate complete scanner weight: 48.5 lb (22 kg).
Integration
The DRS25A-NXT/4 requires a compatible Furuno NavNet TZtouch, TZtouch2, TZtouch3, or supported TimeZero display for radar video and control. Ethernet carries radar data, while NMEA 2000 can provide compatible GPS, heading, AIS, autopilot, and vessel-sensor information. Target tracking and radar overlay require reliable heading and position inputs.
Target Analyzer can help indicate relative target movement, but it does not guarantee identification or collision avoidance. The 96 NM rating is an instrumented range rather than a guaranteed detection distance. Radar performance depends on array height, target size, weather, rain, sea clutter, vessel motion, radar settings, and installation quality.
Installation Notes
Mount the pedestal and 4-foot array on a rigid, level platform with full sweep clearance and enough structural capacity for the scanner, wind loading, and vibration. Keep the scanner clear of people, antennas, masts, rigging, lights, exhaust, and structures that can create shadow sectors.
Use Furuno-approved cables, correctly sized 12V/24V power wiring, appropriate circuit protection, grounding, and protected Ethernet cable routing. Follow Furuno requirements for safe distances, mounting torque, antenna alignment, and display setup. Radar is a navigation aid and does not replace a proper lookout, safe speed, charts, or navigation-rule compliance.
Before Ordering
Confirm compatible Furuno MFD support, available Ethernet connection, 12V/24V supply capacity, 4-foot array clearance, radar-mount strength, cable requirements, and heading/GPS sensor availability before ordering.
| Radar Type | Solid State Pulse Compression (NXT) |
| Antenna Type | Open Array |
| Antenna Size | 4-Foot |
| Peak Power Output | 200W (Powerful Solid State) |
| Maximum Range | 96 Nautical Miles |
| Horizontal Beamwidth | 1.9° (with RezBoost) |
| Vertical Beamwidth | 22° |
| Rotation Speed | 24 / 36 / 48 RPM |
| Pulse Width | 0.08 to 1.2 μs |
| Target Tracking (MARPA/ARPA) | TT (Up to 100 targets) |
| Doppler Technology | Target Analyzer / Bird Mode NXT |
| Dual Range Support | Yes |
| Minimum Range | 10 meters |
| Receiver Noise Figure | 4 dB |
| Operating Voltage | 12V / 24V DC |
| Power Consumption (Operating) | 80 Watts |
| Power Consumption (Standby) | 20 Watts |
| Data Connectivity | Ethernet (NavNet TZTouch compatible) |
| Waterproof Rating | IP56 |
| Wind Velocity Rating | 70 Knots |
| Weight | 22 kg (48.5 lbs) |
| Warranty | 2 Years |
You must be logged in to post a review.












Reviews
There are no reviews yet.