Raymarine Cyclone Pro Radar – with 4-Foot Open Array T70495

Description

Get long-range solid-state radar coverage while keeping open-array clearance manageable with the Raymarine Cyclone Pro 4-Foot Radar. Its 110W CHIRP pulse-compression output, 1.99° beam, and 4-foot antenna provide a useful balance of detailed target separation and installation flexibility for offshore fishing boats, cruisers, and performance center consoles. Need fast radar updates for traffic, weather, and bird activity without magnetron warm-up? The T70495 supports RangeAware processing, TrueColor Doppler, dual-range operation, and ARPA tracking through compatible Raymarine displays.

Key Specifications

• Raymarine Cyclone Pro 4-Foot Open Array Radar, part number T70495.
• 110W solid-state CHIRP pulse-compression radar output.
• 4-foot open array with 1.99° horizontal and 25° vertical beamwidth.
• Up to 96 NM instrumented range and approximately 15 ft (4.5 m) minimum range.
• FastScan rotation modes up to 60 RPM, depending on selected range and operating mode.
• Supports RangeAware, TrueColor Doppler, Bird Mode, independent dual-range operation, and ARPA tracking for up to 50 targets.
• RayNet Ethernet connectivity for compatible Raymarine MFDs.
• 10.2V–31.2V DC input, approximately 95W operating draw, 110W maximum draw, and 30W standby draw.
• IPX6 protection, 100-knot wind rating, and approximately 55.1 lb (25 kg) scanner weight.
• Three-year warranty with registration, subject to regional terms.

Integration

The Cyclone Pro requires a compatible Raymarine MFD and RayNet Ethernet connection for radar control and video. SeaTalkng/NMEA 2000 can distribute compatible GPS, heading, AIS, autopilot, and vessel-sensor data. ARPA and radar overlay require valid heading and position sources.

TrueColor Doppler and RangeAware functions can assist with radar awareness but do not guarantee target recognition or collision avoidance. The 96 NM figure is an instrumented range; actual performance varies with antenna height, target size, rain, sea state, clutter, weather, user settings, and installation quality.

Installation Notes

Mount the pedestal and 4-foot array on a rigid, level platform with full rotation clearance and adequate structural capacity for scanner weight, vibration, and wind loads. Keep the array clear of people, antennas, masts, rigging, lights, exhaust, and structures that can obstruct radar energy.

Use correctly sized power wiring, proper circuit protection, RayNet network cables, and protected cable routes. Follow Raymarine instructions for safe separation, grounding, mounting torque, bearing alignment, and software setup. Professional installation and commissioning are recommended.

Before Ordering

Confirm compatible Raymarine MFD support, RayNet network capacity, 12V/24V power supply, 4-foot sweep clearance, platform strength, required cable lengths, heading/GPS inputs, and professional installation support before ordering.