FREE DELIVERY TODAY - Place your 1st order.
Raymarine Cyclone Pro Radar w/3 Open Array & 15M Cables
Slicing through dense ocean squalls across 96 nautical miles, the Raymarine Cyclone Pro open array rotates a 3-foot array up to 100 RPM, delivering 110W solid-state pulse compression across an IPX6-rated 65.2-lb frame.
- 110W pulse compression scans 96 nautical miles
- 100 RPM rotation speeds up target tracking
- Doppler Target Analyzer highlights collision threats
- 3-foot low-profile array fits compact hardtops
Products are almost sold out
available only:
3In Stock
Description
The Raymarine Cyclone Pro Radar with 3 Foot Open Array and 15 m Cables is a high-power solid-state CHIRP pulse-compression radar system for compatible Raymarine multifunction displays. It combines a 110W Cyclone Pro pedestal, three-foot open array, and 15 m radar cable package to provide Doppler target highlighting, ARPA tracking, Bird Mode, and fast radar updates. The compact three-foot array is suited to installations that need an open-array radar while preserving clearance on hardtops, arches, masts, and radar platforms.
The system offers a maximum instrumented range of up to 96 NM and rotation speeds up to 100 RPM. The three-foot array has an approximately 2.83-degree horizontal beamwidth for improved target separation compared with a compact radome. Practical target detection depends on mounting height, target size, weather, sea conditions, radar settings, antenna obstruction, and installation quality.
Key Specifications
- High-power 110W solid-state CHIRP pulse-compression marine radar with three-foot open array.
- Includes a Cyclone Pro pedestal, three-foot rotating radiator, and 15 m radar cable package.
- Provides up to 96 NM maximum instrumented range.
- Uses a three-foot array with approximately 2.83-degree horizontal beamwidth.
- Supports rotation speeds up to 100 RPM for rapid target refresh.
- Supports Doppler target highlighting, Bird Mode, guard zones, echo trails, and ARPA tracking of up to 50 targets when system requirements are met.
- Requires a compatible Raymarine MFD and RayNet Ethernet connection for radar control and video display.
- Operates from 10.2V to 31.2V DC, with 95W typical transmit use, 195W maximum consumption, and 30W standby power.
Radar Integration
The Cyclone Pro system requires a compatible Raymarine multifunction display and RayNet Ethernet connection. SeaTalkng or NMEA 2000 can provide heading, GPS, AIS, autopilot, and other compatible vessel data, but radar video and scanner control use RayNet Ethernet rather than NMEA 2000.
ARPA tracking and radar overlay require compatible heading and position data where applicable. Doppler processing can help highlight moving targets, while Bird Mode can assist with locating bird activity, subject to radar settings, target movement, mounting height, weather, sea state, and operating conditions. Radar is a navigation aid and does not replace a proper lookout, safe speed, official charts, local notices, or collision-regulation compliance.
Installation Considerations
Mount the pedestal and three-foot array on a rigid level platform with enough structural capacity and full rotating-array clearance. Install the scanner at a practical height above the waterline, align it parallel to the waterline, and keep it clear of crew, masts, rigging, antennas, lights, exhaust, and obstructions. Maintain manufacturer-specified personnel safe distance and compass-safe distance. Route the supplied 15 m cable away from heat, chafe, bilge water, high-current wiring, and moving equipment. Radar installation and commissioning should be completed by a qualified marine-electronics technician.
Warranty and Saltwater Care
Raymarine warranty coverage varies by region, distributor, proof of purchase, product registration, installation method, and intended use. Confirm applicable local warranty terms, exclusions, registration requirements, and service process before purchase.
The Cyclone Pro scanner is designed for marine exposure and has IPX6 ingress protection, but this is not a guarantee against saltwater corrosion. Rinse salt deposits with fresh water where appropriate, avoid high-pressure spray at cable glands and connectors, inspect the array, pedestal, fasteners, cable seals, and mounting platform regularly, and use compatible marine-grade hardware plus approved isolation methods to reduce galvanic-corrosion risk.
Before Ordering
Confirm compatible Raymarine MFD support, RayNet Ethernet connection, suitability of the included 15 m cable route, 10.2V to 31.2V power supply, maximum 195W electrical capacity, three-foot array rotation clearance, mounting-platform strength, mounting height, personnel and compass-safe-distance requirements, heading and GPS source for ARPA or overlay, optional AIS integration, and qualified installation requirements before purchase.
| Brand | Raymarine |
| Model Name | Cyclone Pro Solid State Open Array |
| Part Number/SKU | T70490 |
| Technology Category | High-Power Solid State Pulse Compression |
| Radar Type | 3ft Open Array |
| Peak Power Output | 110 Watts (Equivalent to 12kW Magnetron) |
| Horizontal Beamwidth | 2.83° |
| Max Range | 96 Nautical Miles |
| Rotation Speed | Up to 100 RPM |
| Target Tracking | Doppler Target Analyzer, ARPA, Bird Mode |
| Networking Ports | 1x RayNet Port |
| Voltage Input | 12V / 24V DC |
| Power Draw | 95W (Max) |
| Waterproofing | IPX6 |
| Weight | Pedestal: 56.4 lbs; Array: 8.8 lbs |
| Country of Origin | Hungary |
| Standard Warranty | 2-Year Standard (3-Year with Registration) |
You must be logged in to post a review.

















Reviews
There are no reviews yet.