Furuno NavNet TZtouch2 – 12-Inch Doppler Radar Bundle

Description

Combine a large Furuno touchscreen with Doppler radar awareness in the NavNet TZtouch2 12-Inch Radar Bundle. The package pairs a 12-inch multifunction display with the DRS4D-NXT 24-inch solid-state radome, giving boaters room for radar, charts, sonar, and vessel data during offshore fishing, coastal cruising, and nighttime operation. Need target-motion information without magnetron warm-up time? The DRS4D-NXT adds Target Analyzer Doppler, Fast Target Tracking, RezBoost, and dual-range capability to a compatible NavNet setup.

Key Specifications

• Furuno NavNet TZtouch2 12-inch Doppler radar bundle with DRS4D-NXT radome.
• 12-inch Furuno multifunction display with radar, chartplotting, sonar, and network capability.
• 24-inch DRS4D-NXT solid-state pulse-compression radar dome.
• 25W radar output with up to 36 NM instrumented range.
• 3.9° horizontal beamwidth, adjustable to an effective 2.0° with compatible RezBoost processing, and 25° vertical beamwidth.
• 24, 36, and 48 RPM radar rotation modes.
• Target Analyzer Doppler, Fast Target Tracking for up to 100 targets, and dual-range support.
• Ethernet NavNet radar networking, NMEA 2000 integration, and Wi-Fi support through compatible display configuration.
• 12V/24V DC operation; listed draw is approximately 30W for radar and 36W for the MFD.
• IPX6 radar protection, IP56 MFD-front protection, 70-knot radar wind rating, and approximately 16.1 lb (7.3 kg) radar weight.

Integration

The bundle includes the core radar and display components, but may still require charts, a suitable sonar transducer, heading sensor, AIS data source, network backbone, installation cables, and vessel-specific power protection. Ethernet carries radar video, while NMEA 2000 can distribute compatible GPS, heading, AIS, autopilot, and sensor data.

Target Analyzer uses Doppler processing to help indicate relative target movement. Fast Target Tracking, radar overlay, and related navigation functions depend on compatible display software and valid heading and position inputs. The 36 NM figure is an instrumented range, not a guarantee of target detection in all conditions.

Installation Notes

Mount the 24-inch radome on a rigid, level radar platform with unobstructed rotation and minimal blockage from masts, lights, antennas, rigging, exhaust, or hardtop structures. Install the 12-inch MFD at a protected helm location with suitable viewing angle, mounting depth, cable clearance, and access to controls.

Route power, Ethernet, NMEA 2000, and optional sonar cables through protected paths away from heat, chafe, water, high-current wiring, and moving equipment. Follow Furuno guidance for safe distances, circuit protection, grounding, radar alignment, network configuration, and software setup.

Before Ordering

Confirm MFD mounting space, compatible charts and transducer needs, radar-mount strength, 24-inch dome clearance, 12V/24V supply capacity, Ethernet/NMEA 2000 network requirements, heading/GPS/AIS sensor integration, and required installation cables before ordering.