Raymarine Cyclone Pro Radar w/6 Open Array & 15M Cables

Description

The Raymarine Cyclone Pro Radar with 6 Foot Open Array and 15 m Cables, is a high-power solid-state CHIRP pulse-compression marine radar system with a six-foot rotating antenna array. It combines a 110W Cyclone Pro pedestal, six-foot open-array radiator, and 15 m radar cable package for compatible Raymarine multifunction displays using RayNet Ethernet. The system supports Doppler target highlighting, Bird Mode, ARPA tracking, and high-speed rotation up to 100 RPM.

The 6 ft array provides a narrow horizontal beamwidth for improved angular target separation, while the Cyclone Pro platform offers a maximum instrumented range of up to 96 NM. ARPA can track up to 50 targets when paired with compatible heading, position, display, and network sources. Practical target detection range and tracking performance depend on mounting height, target size, radar settings, sea state, weather, and installation conditions.

Key Specifications

• Raymarine Cyclone Pro 110W solid-state open-array radar system, SKU T70492.
• Includes Cyclone Pro pedestal, six-foot open-array radiator, and 15 m radar cable package.
• Uses CHIRP pulse-compression radar with 110W peak output.
• Provides up to 96 NM maximum instrumented range and supports rotation speeds up to 100 RPM.
• Uses a six-foot antenna array with approximately 1.3-degree horizontal beamwidth for improved target separation.
• Supports Doppler target highlighting, Bird Mode, echo trails, guard zones, and ARPA tracking of up to 50 targets when system requirements are met.
• Requires a compatible Raymarine MFD and RayNet Ethernet network connection.
• Operates from 10.2V to 31.2V DC with 95W typical, 195W maximum, and 30W standby power consumption.

Radar Integration

This radar requires a compatible Raymarine multifunction display and RayNet Ethernet connection for radar-video display and control. NMEA 2000 or SeaTalkng can provide compatible heading, GPS, AIS, autopilot, and other sensor data, but radar video does not travel over NMEA 2000. ARPA and radar overlay require compatible heading and position sources where applicable.

Doppler processing can help highlight moving targets, and Bird Mode can assist with bird detection, subject to radar configuration, scanner mounting, weather, sea conditions, target movement, and local operating environment. Radar is a navigation aid and does not replace a proper lookout, safe speed, official charts, local notices, or collision-regulation compliance.

Installation Considerations

Mount the Cyclone Pro pedestal and six-foot array on a rigid level platform with full rotating-array clearance and sufficient structural strength for the complete scanner assembly. Install it at a practical height above the waterline, align it parallel with the waterline, and keep it clear of crew, masts, rigging, antennas, lights, exhaust, and obstructions. Maintain manufacturer-specified RF safe distance and compass-safe distance, and route the supplied 15 m cables away from heat, chafe, bilge water, high-current cables, and moving equipment. Radar installation and commissioning should be completed by a qualified marine-electronics technician.

Before Ordering

Confirm compatible Raymarine MFD support, RayNet Ethernet connection, suitability of the included 15 m cable run, 10.2V to 31.2V power supply, maximum 195W electrical capacity, six-foot open-array rotation clearance, structural mounting-platform strength, mounting height, personnel and compass-safe-distance requirements, heading and GPS source for ARPA or overlay, optional AIS integration, and qualified installation requirements before purchase.