Raymarine Cyclone 6 Foot Open Array Radar System

Description

The Raymarine Cyclone 6 Foot Open Array Radar System, SKU T70494, is a solid-state CHIRP pulse-compression marine radar package with a six-foot open array and compatible radar pedestal. It is designed for Raymarine multifunction displays using RayNet Ethernet networking and provides long-range radar performance with high-resolution target separation. The complete system includes the pedestal and six-foot radiator array; confirm the exact included cable package for the ordered SKU.

The supplied specifications for T70494 should be verified carefully before publication because Raymarine product listings assign different SKUs to 55W Cyclone and 110W Cyclone Pro configurations. Standard Cyclone systems use 55W CHIRP pulse-compression radar, while Cyclone Pro uses 110W output with a maximum instrumented range up to 96 NM. Practical detection performance depends on mounting, target size, conditions, and radar setup.

Key Specifications

• Raymarine Cyclone solid-state open-array radar system with six-foot radiator and pedestal.
• Uses CHIRP pulse-compression radar technology for close-range clarity and longer-range target detection.
• Requires a compatible Raymarine Axiom, Axiom+, Axiom 2, Axiom Pro, or other supported RayNet multifunction display.
• Uses RayNet Ethernet for radar-video and control connection to compatible Raymarine displays.
• Supports Doppler target highlighting, ARPA target tracking, radar overlay, and other features when supported by the selected scanner and networked sensors.
• Operates from 10.2V to 31.2V DC in the documented Cyclone platform.
• Requires a rigid radar platform with clearance for the six-foot open-array rotation.
• Do not rely on title-based SKU assumptions; confirm whether the ordered system is standard 55W Cyclone or 110W Cyclone Pro before purchase.

Radar Integration

This radar system requires a compatible Raymarine multifunction display and RayNet Ethernet connection. NMEA 2000 or SeaTalkng supports compatible GPS, heading, AIS, autopilot, and vessel-sensor integration, but radar video uses RayNet Ethernet rather than NMEA 2000. Radar overlay and ARPA functions require compatible heading and position data where applicable.

Doppler processing can help highlight moving targets, subject to scanner configuration, target movement, sea conditions, and radar settings. Radar is a navigation aid and does not replace a proper lookout, safe speed, official charts, local notices, or collision-regulation compliance.

Installation Considerations

Mount the pedestal and six-foot array on a strong, level platform at a practical height with the scanner aligned parallel to the waterline. Keep the rotating array clear of people, rigging, masts, antennas, lighting, exhaust, and other obstructions. Maintain manufacturer-specified RF safe distance and compass-safe distance, and route RayNet and power cables away from heat, chafe, moving equipment, and high-current wiring. Radar installation and commissioning should be completed by a qualified marine-electronics technician.

Before Ordering

Confirm the exact T70494 scanner-output configuration, compatible Raymarine MFD, RayNet cable length and network layout, six-foot array clearance, structural mounting platform, supply voltage, heading source for ARPA and overlay, GPS source, NMEA 2000 or SeaTalkng integration needs, safe-distance requirements, included cable package, and qualified installation requirements before purchase.