FREE DELIVERY TODAY - Place your 1st order.
Raymarine Cyclone Pro Radar – with 6-Foot Open Array T70496
Penetrating blinding ocean storms across 96 nautical miles, a Raymarine Cyclone Pro open array pushes 110W solid-state pulse compression through a 6-foot antenna, tracking 50 ARPA targets at 100 RPM across a 100-knot wind-rated 63.9-lb frame.
- 110W solid-state power equals 12kW magnetrons
- 1.32-degree beamwidth maximizes long-range resolution
- 100 RPM rotation speeds up tracking
- RangeAware technology resolves close and distant threats
- Bird Mode locates distant feeding seabirds
Products are almost sold out
available only:
6In Stock
Description
Maximize target separation and long-range radar coverage with the Raymarine Cyclone Pro 6-Foot Open Array Radar. Its 110W solid-state CHIRP pulse-compression platform, narrow 1.32° horizontal beam, and 6-foot antenna give offshore operators detailed radar returns for traffic, weather cells, shoreline structure, and bird activity. Need a high-output open-array radar without magnetron warm-up time? The T70496 Cyclone Pro supports dual-range radar, RangeFusion, ARPA tracking, RangeAware technology, and high-speed scanning on compatible Raymarine MFDs.
Key Specifications
- Raymarine Cyclone Pro 6-Foot Open Array Radar, part number T70496.
- 110W solid-state CHIRP pulse-compression radar output.
- 6-foot open array with 1.32° horizontal and 25° vertical beamwidth.
- Up to 96 NM instrumented range and approximately 15 ft (4.5 m) minimum range.
- FastScan rotation modes up to 60 RPM, depending on range and configuration.
- Supports dual-range operation, RangeFusion, RangeAware, Bird Mode, and ARPA tracking for up to 50 targets.
- RayNet Ethernet radar networking.
- 10.2V–31.2V DC input, approximately 95W typical draw, 110W maximum draw, and 30W standby draw.
- IPX6 protection, 100-knot wind rating, and approximately 63.9 lb (29 kg) scanner weight.
Integration
The Cyclone Pro requires a compatible Raymarine MFD and RayNet Ethernet connection for radar control and video. SeaTalkng/NMEA 2000 can provide compatible heading, GPS, AIS, autopilot, and vessel sensor data. ARPA and radar overlay need accurate heading and position inputs.
RangeAware and other radar-processing features can assist awareness, but they do not guarantee target identification or collision avoidance. The 96 NM figure is an instrumented range; practical detection varies with array height, target size, rain, sea clutter, weather, radar settings, and installation quality.
Installation Notes
Mount the pedestal and 6-foot array on a rigid, level platform rated for the scanner weight, rotation loads, and wind exposure. Allow complete sweep clearance and keep the array clear of personnel, antennas, masts, rigging, lights, exhaust, and structures that can create shadow sectors.
Use correctly sized 12V/24V power wiring, recommended circuit protection, and protected RayNet cable routing. Follow Raymarine requirements for safe distances, grounding, mounting torque, bearing alignment, and software configuration. Professional installation and commissioning are strongly recommended.
Before Ordering
Confirm compatible Raymarine MFD support, RayNet network capacity, 6-foot rotation clearance, mounting-platform strength, 12V/24V power capacity, cable requirements, heading/GPS inputs, and professional installation support before ordering.
| Radar Type | Solid State Pulse Compression (CHIRP) |
| Antenna Type | Open Array (Pro Version) |
| Antenna Size | 6-Foot |
| Peak Power Output | 110W (Equivalent to 12kW Magnetron) |
| Maximum Range | 96 Nautical Miles |
| Horizontal Beamwidth | 1.32° |
| Vertical Beamwidth | 25° |
| Rotation Speed | Up to 100 RPM (FastScan) |
| Pulse Width | 40 ns to 14.7 μs |
| Target Tracking (MARPA/ARPA) | ARPA (Up to 50 targets) |
| Doppler Technology | RangeAware / Doppler Collision Avoidance |
| Dual Range Support | Yes (Independent Control) |
| Minimum Range | 15 ft (4.5 meters) |
| Receiver Noise Figure | Less than 4 dB |
| Operating Voltage | 12V / 24V DC |
| Power Consumption (Operating) | 95W (Typical) / 110W (Max) |
| Power Consumption (Standby) | 30W |
| Data Connectivity | RayNet (Ethernet) |
| Waterproof Rating | IPX6 |
| Wind Velocity Rating | 100 Knots |
| Weight | 29 kg (63.9 lbs) |
| Warranty | 3 Years (with registration) |
You must be logged in to post a review.
Reviews
There are no reviews yet.